It probably won't work on that tablet since the OMAP4 and OMAP5 SoCs are different. We will definitively let you know when it will be available.
:rjs On Mon, Oct 21, 2013 at 11:19 AM, Ravi Abi <[email protected]> wrote: > > > ---------- Forwarded message ---------- > From: Ravi Abi <[email protected]> > Date: Mon, Oct 21, 2013 at 10:58 AM > Subject: Re: TIZEN IVI 3.0 for OMAP 4460 Blaze Tablet > To: Rudolf Streif <[email protected]> > > > the omap 4460 blaze tablet allows reflashing of firmware... > > will the OMAP5 port that you guys working on currently; work on omap 4460 > blaze tablet? > > once the port is done can please mail me the links... > > > On Sat, Oct 19, 2013 at 1:51 AM, Rudolf Streif < > [email protected]> wrote: > >> Hi Ravi, >> >> >>> >>> I would like to know whether its possible to flash tizen ivi 3.0 into >>> omap4460 blaze tablet. >>> >> >> That would depend if the firmware of this tablet allows reflashing the >> entire operating system. >> >> >>> If so can you please provide the link for the images and flashing >>> tutorial. >>> >> There are no Tizen IVI 3.0 images for this tablet. I don't know about any >> instructions to flash this >> tablet with a new operating system. >> >> If its not ported yet, can you please guide to port tizen 3.0 ivi into >>> omap 4460 blaze tablet. >>> >>> We are working on an OMAP5 port of Tizen IVI for the TI OMAP5 EVM. We >> are close. The majority of the >> packages are building and we can boot the board with the Tizen IVI 3.0 >> stack into the console. We are >> still working on X support. >> >> When it's done we will make images and instructions on how to build it >> available. >> >> >> Rudi >> >> > > > _______________________________________________ > IVI mailing list > [email protected] > https://lists.tizen.org/listinfo/ivi > >
_______________________________________________ IVI mailing list [email protected] https://lists.tizen.org/listinfo/ivi
