I couldn’t spot anything unusual in your log files. It looks to me like everything is started correctly in your guest environment.
Can you confirm which Intel graphics card you have (and which driver version is loaded) on your host? Thanks, Geoffroy From: Sathish Kumar Balasubramaniam -ERS, HCL Tech [mailto:[email protected]] Sent: Friday, January 03, 2014 12:40 PM To: Mark De Roussier; VanCutsem, Geoffroy; [email protected] Subject: RE: Problem booting image in VMPlayer Hi Mark, Ctrl+Alt+F1 doesn’t give any prompt. I got the prompt by pressing Ctrl+Alt+F3 For copying the output of “journalctl –a”, you can connect using PuTTY using the IP displayed by command ifconfig (Login user – root, pass – tizen) Regards, B.Sathish Kumar From: Mark De Roussier [mailto:[email protected]] Sent: Friday, January 03, 2014 4:18 PM To: VanCutsem, Geoffroy; Sathish Kumar Balasubramaniam -ERS, HCL Tech; [email protected]<mailto:[email protected]> Subject: RE: Problem booting image in VMPlayer Hi Geoffroy, Ctrl-Alt-F1 returns me to a display of the latest console output, but does not actually give me a console if you see what I mean – I cannot enter commands. I suppose that theoretically using qemu I might be able to mount the vmdk disk and poke around there. Not sure what I’d be looking for. Attached are the vmx, the log ( zipped ), and a png of the last console output ( I can’t capture it any other way from the host side I think ). I think the avsystem issue shown in the console output is a known M2 problem (https://bugs.tizen.org/jira/browse/TIVI-1474 ). I think the last log entry before I shutdown the VM is line 1728. Cheers, Mark de Roussier From: VanCutsem, Geoffroy [mailto:[email protected]] Sent: 03 January 2014 09:38 To: Sathish Kumar Balasubramaniam -ERS, HCL Tech; Mark De Roussier; [email protected]<mailto:[email protected]> Subject: RE: Problem booting image in VMPlayer I would suggest the following: - Let’s stick to the 3.0-M2-Aug preview for now - Keep the “Accelerate 3D graphics” option enabled If all you get is a black screen, try ‘Ctrl-Alt-F1’ (or other Fx) to see if you have a console available - Can you both check (and maybe send us): - <virtual-machine-name>.vmx (on your host, directly in your folder where the VM disks/config files are located) - ‘vmware.log’ (same folder as above) - ‘journalctl –a’ output (in your guest VM) Thanks, Geoffroy From: Sathish Kumar Balasubramaniam -ERS, HCL Tech [mailto:[email protected]] Sent: Friday, January 03, 2014 8:23 AM To: VanCutsem, Geoffroy; Mark De Roussier; [email protected]<mailto:[email protected]> Subject: RE: Problem booting image in VMPlayer I too have the same issue. The only difference I can see is I am trying in 32-bit whereas in the website it’s given as 64-bit. Regards, B.Sathish Kumar From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of VanCutsem, Geoffroy Sent: Thursday, January 02, 2014 10:38 PM To: Mark De Roussier; [email protected]<mailto:[email protected]> Subject: RE: Problem booting image in VMPlayer Hi Mark, Happy New Year to you too and to the rest of the Tizen IVI community out there! ☺ It sounds indeed like there is some sort of deficiency on your host machine… not sure what. I’m using a Lenovo X220 (Core i5 with Intel HD Graphics 3000) and that works fine. The other thing you could check is wether VT (virtualisation) is turned on on your machine (in the Bios). I don’t know if that could make a difference but something to double-check. Cheers, Geoffroy From: Mark De Roussier [mailto:[email protected]] Sent: Thursday, January 02, 2014 4:31 PM To: VanCutsem, Geoffroy; [email protected]<mailto:[email protected]> Subject: RE: Problem booting image in VMPlayer Hi Geoffroy, Thanks for the quick reply ! Happy new year ☺. So, I have had many problems getting a 3.0 image going in a VM, and have tried many combinations of player version, host platform, and image. All of my attempts to use VMWare Player 6 ( on Windows and Linux ( Kubuntu 12.04 ), using M2 and a later daily build from December ) have failed early in kernel initialization with a complaint about being unable to read the RTC. You are correct about the lack of 3D acceleration, it’s good to confirm that this is related. I deselected this option, because with it selected I would end up with just a black screen displayed just after the ‘Reached target Graphical Interface’ message – no splash, no prompt, no logs, nothing. This wasn’t very useful, so I deselected it just to be able to read the console output ☺. So I am still thinking that my host platform is deficient in some sense. Perhaps VMPlayer just does not play nice with these HD Graphics drivers, or something like that. I’ll see if there are some newer graphics drivers available. In the slightly longer term I can switch to a different host, but that’s a negotiation with our IT dept ☺. Cheers, Mark de Roussier From: VanCutsem, Geoffroy [mailto:[email protected]] Sent: 02 January 2014 14:44 To: Mark De Roussier; [email protected]<mailto:[email protected]> Subject: RE: Problem booting image in VMPlayer Hi Mark, This is typically what happens when there is no 3D acceleration available. Can you make sure that the “Accelerate 3D graphics” option is checked (in the virtual machine settings under “Display”)? FYI, I have just tested that particular Tizen IVI image on both my systems and it works fine for me too. I shall also note that I have since then upgraded my VMware Player to version 6.0.0 build-1295980 (on Windows 7 Pro SP1, 64b) so feel free to give that version a try too. Thanks, Geoffroy From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Mark De Roussier Sent: Thursday, January 02, 2014 3:11 PM To: [email protected]<mailto:[email protected]> Subject: Problem booting image in VMPlayer Hi everyone, I’m attempting to get a Tizen 3.0 IVI image booting in VMPlayer. I’m using : VMPlayer 5.02 ( as per the VM instructions here https://wiki.tizen.org/wiki/IVI/IVI_3.0_VMware ) : http://download.tizen.org/releases/milestone/tizen/ivi/tizen_20130829.9/images/ivi-release-mbr-i586/ Windows 7 Pro SP1 64bit My boot sequence gets to [ OK ] Reached target Graphical Interface [ <timestamp value> ] pcnet32 0000:2.01.0 ens33: link up and then just appears to halt – no login prompt, etc. A colleague is able to get this combination booting, but I am not, which possibly suggests a host hardware related issue. The relevant machine is a Dell Latitude 6410 laptop ( Intel HD Graphics ). Has anyone encountered a problem like this, or have any suggestions for further investigation ? Thanks, Mark de Roussier MARK DE ROUSSIER Team Lead Symphony Teleca Sunley House, 46 Jewry Street, Winchester, Hampshire, SO23 8RY Phone: +441962891219, Fax: +441962868867 [email protected]<mailto:[email protected]> www.symphonyteleca.com<http://www.symphonyteleca.com> Teleca Limited, a company registered in England & Wales, registration number 2773878, registered office at Sunley House, 46 Jewry Street, Winchester, Hampshire SO23 8RY. VAT registration number GB 674 6583 90 Follow what's going on at Symphony Teleca's blog on www.symphonyteleca.com/blog<http://www.symphonyteleca.com/blog>. Please consider the environment before you print. Notice to recipient: This e-mail (including any attachments) is meant for the intended recipient only, may contain confidential and proprietary information, and is protected by law. If you received this e-mail in error, please immediately notify the sender of the error by return e-mail, delete this communication and any attachments, and shred any printouts. Unauthorized review, use, dissemination, distribution, copying or taking of any action based on this communication is strictly prohibited. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ---------------------------------------------------------------------------------------------------------------------------------------------------- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
_______________________________________________ IVI mailing list [email protected] https://lists.tizen.org/listinfo/ivi
