Hi, Geoffroy, In this case, gateway info cannot be providing by DHCP due to it¹s IVI emulator (qemu). Networking in qemu is using port redirection mechanism and without DHCP.
I know the method of setup static ip in ConnMan like that Ethernet.config [global] Name=Ethernet Description=Ethernet network configuration [service_ethernet] Type=ethernet IPv4=10.0.2.16/255.255.255.0/10.0.2.255 And put this file (ethernet.config) to /var/lib/connman/ directory. Then static ip will be setup already. But I don¹t know how to setup the default gateway by connMan. Do you know that? Thanks, Ziv On 1/17/14, 7:11 PM, "VanCutsem, Geoffroy" <[email protected]> wrote: >I'd recommend to use ConnMan directly for this instead of >modifying/creating config files (I'm just not sure if/when they get in >conflict with ConnMan). In general, I'd expect the gateway info to be >provided by your DHCP server, is that not the case? > >If you'd like to set-up a static IP address, please take a look here: >https://wiki.tizen.org/wiki/IVI/ConnMan_Tips_%26_Tricks > >HTH, >Geoffroy > >On Fri, 2014-01-17 at 07:53 +0000, Michael Johnson wrote: >> You would need create an interface file >> in /etc/sysconfig/network-scripts and add the default gateway in >> there: >> >> i.e. GATEWAY=aaa.aaa.aaa.aaa >> >> Have a look at this link on how to set it up, although it doesn't >> mention adding the gateway, it is a typical example of a configuration >> file for some of the linux OSes I've used: >> http://docs.oracle.com/cd/E37670_01/E41138/html/ol_about_netconf.html >> >> Hope that helps >> Mike >> >> >> >> MICHAEL JOHNSON >> Test Engineer >> >> Symphony Teleca >> Sunley House, 46 Jewry Street, Winchester, Hampshire, SO23 8RY >> Phone: +441962868866, Fax: +441962868867 >> [email protected] >> www.symphonyteleca.com >> >> Teleca Limited, a company registered in England & Wales, registration >> number 2773878, registered office at Sunley House, 46 Jewry Street, >> Winchester, Hampshire SO23 8RY. VAT registration number GB 674 6583 90 >> >> Follow what's going on at Symphony Teleca's blog on >> www.symphonyteleca.com/blog. Please consider the environment before >> you print. >> >> Notice to recipient: This e-mail (including any attachments) is meant >> for the intended recipient only, may contain confidential and >> proprietary information, and is protected by law. If you received this >> e-mail in error, please immediately notify the sender of the error by >> return e-mail, delete this communication and any attachments, and >> shred any printouts. Unauthorized review, use, dissemination, >> distribution, copying or taking of any action based on this >> communication is strictly prohibited. >> >> >> >> >> ______________________________________________________________________ >> From: [email protected] [[email protected]] on >> behalf of Yu, Max A [[email protected]] >> Sent: Friday, January 17, 2014 7:30 AM >> To: [email protected] >> Subject: How to configure default gateway? >> >> >> >> I can set default gateway by following command in Tizen IVI: >> # route add default gw 10.0.2.2. eth0 >> >> Can I do the same thing by editing some config files? >> >> Thanks, >> Max >> >> _______________________________________________ >> IVI mailing list >> [email protected] >> https://lists.tizen.org/listinfo/ivi > >Intel Corporation NV/SA >Kings Square, Veldkant 31 >2550 Kontich >RPM (Bruxelles) 0415.497.718. >Citibank, Brussels, account 570/1031255/09 > >This e-mail and any attachments may contain confidential material for the >sole use of the intended recipient(s). Any review or distribution by >others is strictly prohibited. If you are not the intended recipient, >please contact the sender and delete all copies. >_______________________________________________ >IVI mailing list >[email protected] >https://lists.tizen.org/listinfo/ivi _______________________________________________ IVI mailing list [email protected] https://lists.tizen.org/listinfo/ivi
