Hi Jin, You should also make sure 800x480 is supported by your monitor. Otherwise, the config will not take effect.
Thanks, Ning From: [email protected] [mailto:[email protected]] Sent: Tuesday, February 25, 2014 4:21 PM To: Li, Horace; Wang, Ning W; [email protected] Subject: Re: RE: tizen ivi resource hi Horace Ning I follow your advice , make new file named " /etc/xdg/weston/weston.ini" . As follow: [output] name=VGA1 mode= 60.00 800 480 -hsync +vsync == And then I reboot the system . The resource is not changed. Can you give me a template of the "weston.ini"? ________________________________ jin From: Li, Horace<mailto:[email protected]> Date: 2014-02-25 15:12 To: Wang, Ning W<mailto:[email protected]>; [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]> Subject: RE: RE: tizen ivi resource Hi, Jin, You could use `weston-info` to find out your monitor info and what resolutions it may support. Then follow Ning’s instructions below to set proper screen resolution you want to set up. I tried here with my IVI device, it works. Thanks, Horace From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Wang, Ning W Sent: Tuesday, February 25, 2014 2:14 PM To: [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]> Subject: RE: RE: tizen ivi resource Yeah… Aug release does NOT have the config file by default. If you install ICO home screen[1], it will be brought in. Anyway, you can try to create the file manually. A sample output section of VGA looks like: [output] name=VGA1 mode=1920x1080 Thanks, Ning [1] https://wiki.tizen.org/wiki/IVI/IVI_August_29,_3.0-M2-Aug#New_HomeScreen_not_installed_by_default From: [email protected]<mailto:[email protected]> [mailto:[email protected]] Sent: Tuesday, February 25, 2014 1:40 PM To: Wang, Ning W; [email protected]<mailto:[email protected]> Subject: Re: RE: tizen ivi resource hi Ning Thanks for your reply,but I can't find that file.In that directory (/etc/xdg), there are 3 files, as follow"autostart/obexd-server.desktop", "autostart/syncevo-dbus-server.desktop","systemd/user" My system is August 29, 2013 3.0-M2-Aug milestone<https://wiki.tizen.org/wiki/IVI/IVI_August_29,_3.0-M2-Aug> . Do I need to install something else ? ________________________________ JIM From: Wang, Ning W<mailto:[email protected]> Date: 2014-02-25 13:02 To: [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]> Subject: RE: tizen ivi resource You can change the resolution by modifying the mode entry of VGA output in /etc/xdg/weston/weston.ini. Thanks, Ning From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of [email protected]<mailto:[email protected]> Sent: Tuesday, February 25, 2014 11:01 AM To: [email protected]<mailto:[email protected]> Subject: tizen ivi resource hi all I have a problem that I run an app in tizen ivi , and the display is vga device. But the system's resolution is too large ,so that my app looks very small (In fact my app's resolution is 720*480 ). So how can I change the system's resolution. thks! ________________________________
_______________________________________________ IVI mailing list [email protected] https://lists.tizen.org/listinfo/ivi
