Hi, You can try WAYLAND_DEBUG=1 with Weston and application to see its behavior with detail logs. You can observe what happens on it. If you can provide basement of snapshot and sandbox of your modification, I can try.
BR, Nobuhiko Tanibata > -----Original Message----- > From: IVI [mailto:[email protected]] On Behalf Of karthik > karthik > Sent: Monday, July 28, 2014 8:18 PM > To: [email protected] > Subject: RE: Questions on weston-ivi-shell > > > > Hi, > > Can you clarify a few things please.. > > I tried running the application again > > The error i m facing is not constant. > > Sometimes, i do get the HTML screen. That means it is creating a > wl shell. > > So when i launch weston, 3 out of 10 i get html page. But for the > other 7 times, i get a blank screen. > > So what i see is some instability.. > > When i had tried to launch the screen without weston, there is no > problem in the launch. > > Thanks, > Sathish > > ------------------------------ > On Mon 28 Jul, 2014 12:50 AM BST Tanibata, Nobuhiko (ADITJ/SWG) wrote: > > >Hi, > > > > > > > >> there is a ivi_shell similar to desktop_shell that is used.. > >Yes. But it shall be discussed in Tizne IVI al well. > > > > > > > >> IVISurfaceCreator. > > > >Try it by hand. And please check if your application create wl_shell > correctly. > > > >I think HTML5 framework only support xdg-shell.. So IVIsurfaceCreator > can not find any wl_shell, I assume. > > > > > > > >BR, > > > >Nobuhiko Tanibata > > > > > > > > > > > > > > > >From: IVI [mailto:[email protected]] On Behalf Of karthik > karthik > >Sent: Saturday, July 26, 2014 8:43 PM > >To: [email protected] > >Subject: Re: Questions on weston-ivi-shell > > > > > > > >Hi, > > > >Thanks for the reply, > > > >I have a few doubts. Can you clarify them for me. > > > >1) "Additionally, supporting wl_shell on ivi-shell is temporary.".. > > > >Does this mean the following. > > > >Currently, wl_shell, the default shell in wayland/weston is supported > on tizen.. But outside of tizen, there is a ivi_shell similar to > desktop_shell that is used.. > > > >Can you point me to some documentation on wl_shell so that I can > understand it better ?? > > > >2) I am trying to modify weston-ivi-shell, a bit. Instead of launching > application binaries, I want to launch HTML5 web apps. > > > >I took the ICO Homescreen as example and launching the apps using tizen > application api's namely "aul_app_launch". > > > >When I launch these applications, I am facing issues in > IVISurfaceCreator.. > > > >When I run the program, the api returns a success on launch.. > > > >What I dont get to see application on the display each time.. > > > >If I look at the log, I could see this print statement printed 10 times.. > > > > printf("IVISurfaceCreator: Search of native handle was > ended.\n" > > " But no surface was created.\n" > > " Retry get_native_handle.\n"); > > > >Is there a reason why this is happening.. Can you help me with this.. > > > >Thanks, > >Sathish > > > > > > > > > > > > > > > > > > > >On Wednesday, 23 July 2014 7:21 AM, "Tanibata, Nobuhiko (ADITJ/SWG)" > <[email protected]> wrote: > > > > > > > >Hi, > > > > > > > >I will update the following info to wiki as well. Additionally, > supporting wl_shell on ivi-shell is temporary. > > > > > > > >If application supports ivi_application.create_surface, you don’t have > to use IVISurfaceCreater to map wl_surface to Global ID. > > > >If you want to show application only supports wl_shell, > IVISurfaceCreater is useful tool. > > > > > > > > a) Launch application using system calls. The application on launch, > will render the graphics on the wayland surface. > > > > Steps 1 and 2 mentioned above will done in the application itself. > > > > > > > >IVISurfaceCreator --help > > > >Usage: IVISurfaceCreator <Process ID> <Window Title> <IVI-Surface ID> > > > > > > > >IVISurfaceCreator is a Tool to map wl_surface to GlobalID: <IVI-Surface > ID>. “Window Title” is set by using wl_shell_surface::set_title. > > > >E.g. Weston-flower names its title as “Flower”. If you set NULL to the > parameter, IVIsurfaceCreator will map the oldest wl_surface to the ID. > > > >As usual, Weston client example create only one wl_surface in its process. > The title is not so important parameter. > > > > > > > >After that, you can use <IVI-Surface ID> to control the wl_surface by > using ivi layout APIs. > > > > > > > >If you want to get notification when an application create > wl_shell_surface, you can use the following event in ivi_application.xml, > extension event for TIZEN IVI only. > > > ><event name="wl_shell_info"> > > > > <arg name="pid" type="int"/> > > > > <arg name="title" type="string" allow-null="true"/> > > > ></event> > > > > > > > >BR, > > > >Nobuhiko > > > > > > > >From: IVI [mailto:[email protected]] On Behalf Of karthik > karthik > >Sent: Wednesday, July 23, 2014 1:56 AM > >To: [email protected] > >Subject: Questions on weston-ivi-shell > > > > > > > >Hi, > > > > > > > > In the process of trying to understand layer management, I had > understood the following. Need some help to check whether I am right with > these understanding. > > > > > > > >Steps :- > > > > > > > >To put an image file on to a layer :- > > > > > > > >1) Use wl_compositor_create_surface to create a wayland surface. > > > >2) Write the image data on to the wayland surface. > > > >3) Use ivi_application_surface_create api to tie the wayland surface > with the Global ID. > > > >4) Now to add it to a Layer, > > > > a) Use the global ID to extract the surface using the API > weston_layout_getSurfacefromID. > > > > b) The resultant surface is added to the layer using the API > weston_layout_addSurfacetoLayer. > > > > > > > >To put an application on to a layer :- > > > > > > > > a) Launch application using system calls. The application on launch, > will render the graphics on the wayland surface. > > > > Steps 1 and 2 mentioned above will done in the application itself. > > b) Launch IVISurfaceCreator. The Global ID is passed via arguments to > the IVISurfaceCreator. > > c) IVISurfaceCreator calls the ivi_application_surface_create api's > to tie the wayland surface with the Global ID. > > d) Now to add it to a layer, it is similar to step 4 mentioned above.. > > > >Is this understanding correct ?? > > > >Thanks, > > > > > > > > > > _______________________________________________ > IVI mailing list > [email protected] > https://lists.tizen.org/listinfo/ivi _______________________________________________ IVI mailing list [email protected] https://lists.tizen.org/listinfo/ivi
