On Oct 3, 2005, at 10:43 AM, Folashade Adeyosoye wrote:
Please can you go thru my dmesg, my card does not seem to work.
Please only send plain text emails to the list.
I followed these instructions.
PVR-500
Using knoppmyth R5A16 and ivtv: version 0.3.9
http://www.bitbenderforums.com/~ralpha6/knoppmyth/knoppmythtv.htm
These instruction include tons of options in modprobe.conf, while the
latest ivtv driver works best auto-detecting. Try removing all the
options lines for ivtv, cx25840, saa7127, msp3400.
From the dmesg you included :
ivtv: i2c attach to card #0 ok [client=tveeprom, addr=50]tveeprom:
Hauppauge: model = 23552, rev = D592, serial# = 2995024tveeprom:
tuner = <unknown> (idx = 101, type = -885711276)tveeprom: tuner fmt
= <none> (eeprom = 0x00, v4l2 = 0x00000000)tveeprom:
audio_processor = MSP3410D (type = 5)ivtv: This is the first unit
of a PVR500ivtv: No tuner detected, default to NTSCivtv: i2c attach
to card #0 ok [client=(tuner unset), addr=60]tuner 0-0060: chip
found @ 0xc0 (ivtv i2c driver #0)cx25840: Unknown parameter
`i2c_enable'ivtv: Failed to load module cx25840
Blech, html format makes this hard for me to read, but there's 2
issues. First, you specified an option to cx25840 that was invalid
and caused it to fail to load. Removing the options as I said before
will fix this. Second, your tuner is not detected, but the D592
version should work fine, so try removing all your modprobe options
and see if it auto-detects. If it does not, then I'd guess that the
kernel version of the tuner module was getting loaded instead of the
ivtv version. Try renaming the kernel one.
Keith C
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
