> It's looking like 0.3.9 (or, soon to be 0.4.0) > version upgrade is probably the right path to go, here... right?
Yes, > alias tveeprom tveeprom-ivtv Remove this line. > I've read several items on the web (and in this list) that indicate I should > modify this file to include another ivtv line: > > alias char-major-81-1 ivtv > > ..below the "-81-0" line. Since I'll be adding a PVR-500, which is > essentially two PVR-150s, do I need to also add a third ivtv line? > > (alias char-major-81-2 ivtv) > > ?? Yes, if you need any of those lines at all, which you may not, but they won't hurt. > > Finally, in the FAQ (yes, I've read it!), the answer to the question "I have > more than 1 card. What should be in my modprobe.conf?" discusses possibly > needing to add a few more lines to control i2c, specifically in the case of > adding a PVR-500 to an existing PVR-350 system: > > options cx25840 i2c_enable=-1,1,1 > options saa7127 i2c_enable=1,-1,-1 > > Is this FAQ answer still relevant to the 0.3.9 (or 0.4.0) driver? Nope, this is all autodetected now. > I would truly appreciate any/all answers (especially the correct ones!! > haha!) you folks could provide to the above questions.. as well as any > other relevant insights. :) Hopefully these are the right answers. Good luck. > > Thanks for taking the time to read through this... > > - briand > _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
