Hi, I have a PVR-250 with a FQ1216AME MK4 (tuner 22) tuner. The picture is perfect, but i havent got the sound to work. Occasinaly i get the sound working on frequency 259250, but this is the only frequency that i have found that works.
Im running 4.0 but i have tried several ivtv versions and several firmware versions, but the same result. I have also tried a different PVR-250 with tunder 27 and this works perfrectly in the system. my modprobe looks like: alias char-major-81 videodev alias char-major-81-0 ivtv The output from dmesg can be found below. BR / Johan ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.0 (tagged release) loading ivtv: Linux version: 2.6.10-5-686-smp SMP preempt 686 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv0: Autodetected WinTV PVR 250 card (iTVC16 based) ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20 tveeprom: ivtv version tveeprom: Hauppauge: model = 32059, rev = B143, serial# = 7263640 tveeprom: tuner = Temic 4046FM5 (idx = 43, type = 22) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = MSP4418 (type = 19) tveeprom: decoder processor = SAA7115 (type = 13) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] msp34xx: ivtv version msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Oct 10 2005 17:44:36 ivtv0: i2c attach to card #0 ok [client=MSP3418W-A2, addr=40] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800008d7503] ivtv0: loading /lib/modules/ivtv-fw-enc.bin ivtv0: Encoder revision: 0x02040011 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 22 (Temic PAL/SECAM multi (4046 FM5)) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 250, card #0 _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
