i'm hjaving this problem, i get lots of I2c errors in my dmesg output. but only for the second tuner
On 10/5/05, Keith C <[EMAIL PROTECTED]> wrote: > On Oct 4, 2005, at 11:39 PM, Eric Schwartz wrote: > > > I've had this working on earlier ivtv versions but naturally I can't > > recall which version was working. :) > > > > I have only one PVR-500MCE in my system. I can't seem to get any data > > at all from /dev/video1-- when I do a > > > > dd if=/dev/video1 of=/tmp/bah > > > > I can let it run for minutes at a time and I will get 0 bytes. > > Running > > the same command for a few seconds on /dev/video0 gives 10MB of > > MPEG video. > > > > My /etc/modprobe.d/ivtv looks like: > > > > $ cat /etc/modprobe.d/ivtv > > alias char-major-81 videodev > > alias char-major-81-0 ivtv > > alias char-major-81-1 ivtv > > > > I've attached the output of dmesg when I do a modprobe, and later > > (with > > ivtv_debug=511) when I do the dd. Although the version I'm using in > > those logs is 0.3.9, I find the same result with 0.3.8 and 0.3.7k. > > > > Any clues and/or help would be most welcome. > > I've got the exact same model of PVR-500 (D492) and have no > problems. My only difference that I can tell from the dmesg log is > in the version of ivtv-fw-enc.bin (I'm using the 0x02040011 version). > > Your module loading order is a little different, as my tda9887 loads > quite a bit later in the ivtv initialization, but I doubt thats an > issue. Any kernel versions of modules loading instead of ivtv ones? > > I'm not a developer, so the ivtv debug messages are not something > that I can help with. > > Keith C > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
