Hi folks, I've tried different ivtv versions and firmwares and read probably all those nice how-to's and readme's. but still can't get my PVR-500MCE working. Since I have identical card nearby, I'm guessing that the problem is in unattached i2c client's (i'm missing those): --- client=(tuner unset), addr=60 client=(tuner unset), addr=61 client=tda9887, addr=43 --- It seems that chips some are just not detected. I suspect that the hardware might be faulty, but I'm still hoping that maybe someone has a nice hint for me ;)
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.5.0 (development svn snapshot revision 2789) loading ivtv: Linux version: 2.6.8-24.18-default 586 REGPARM gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 3 (level, low) -> IRQ 3 i2c-algo-bit.o: (0) scl=1, sda=1 i2c-algo-bit.o: (1) scl=1, sda=0 i2c-algo-bit.o: (2) scl=1, sda=1 i2c-algo-bit.o: (3) scl=0, sda=1 i2c-algo-bit.o: (4) scl=1, sda=1 i2c-algo-bit.o: ivtv i2c driver #0 passed test. tveeprom: module not supported by Novell, setting U taint flag. tveeprom: Second (radio) tuner idx 101 tveeprom: ivtv version tveeprom: Hauppauge: model = 23559, rev = D491, serial# = 8416059 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] ivtv0: This is the first unit of a PVR500 tuner: module not supported by Novell, setting U taint flag. cx25840: module not supported by Novell, setting U taint flag. cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 0-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes) ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] wm8775: module not supported by Novell, setting U taint flag. wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9887: module not supported by Novell, setting U taint flag. ivtv0: loading /lib/modules/ivtv-fw-enc.bin ivtv0: Encoder revision: 0x02040011 g[4034]: STATS: dropped 26 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream ivtv0 warning: i2c client addr: 0x00 not found for command 0x40047401! ivtv0 warning: i2c client addr: 0x00 not found for command 0x40307603! ivtv0 warning: i2c client addr: 0x00 not found for command 0x4004760f! ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI interrupt 0000:03:09.0[A] -> GSI 5 (level, low) -> IRQ 5 i2c-algo-bit.o: (0) scl=1, sda=1 i2c-algo-bit.o: (1) scl=1, sda=0 i2c-algo-bit.o: (2) scl=1, sda=1 i2c-algo-bit.o: (3) scl=0, sda=1 i2c-algo-bit.o: (4) scl=1, sda=1 i2c-algo-bit.o: ivtv i2c driver #1 passed test. tveeprom: Second (radio) tuner idx 101 tveeprom: ivtv version tveeprom: Hauppauge: model = 23559, rev = D491, serial# = 8416059 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 1-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes) ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b] ivtv1: This is the second unit of a PVR500 ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: loading /lib/modules/ivtv-fw-enc.bin ivtv1: Encoder revision: 0x02040011 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv1 warning: i2c client addr: 0x00 not found for command 0x40047401! ivtv1 warning: i2c client addr: 0x00 not found for command 0x40307603! ivtv1 warning: i2c client addr: 0x00 not found for command 0x4004760f! ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 ivtv: ==================== END INIT IVTV ==================== thnx for reading this ;) -- urmas _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
