Hey all,
I've seen many postings with problems similar to mine, but the
solutions never seemed to work for me. I'm running Debian Testing with
kernel 2.6.8 on an AMD Athlon XP3000. I am unable to get any sort of
signal (other than static) out of my card. When loading the ivtv module
I get the messages "ivtv0: Unreasonably low latency timer, setting to 64
(was 32)", and "tuner type not set" (full IVTV dmesg listing below).
I've tried tweaking all sorts of setting under /etc/modutils/ivtv but
the results are always the same. I thought maybe all I needed to do was
`modprobe tuner` (I made sure that /lib/modules/2.6.8/extra/tuner.ko was
the only tuner module) but that caused a segfault. I've been working on
this for a few days now, and have come up with nothing -- any ideas?
Thanks in advance,
Robert Casey
################# dmesg for modprobe tuner #################
Oct 12 13:50:36 beecee kernel: tuner: Ignoring new-style parameters in
presence of obsolete ones
Oct 12 13:50:36 beecee kernel: kobject_register failed for i2c TV tuner
driver (-17)
Oct 12 13:50:36 beecee kernel: [kobject_register+87/96]
kobject_register+0x57/0x60
Oct 12 13:50:36 beecee kernel: [bus_add_driver+80/176]
bus_add_driver+0x50/0xb0
Oct 12 13:50:36 beecee kernel: [driver_register+47/64]
driver_register+0x2f/0x40
Oct 12 13:50:36 beecee kernel: [i2c_add_driver+74/208]
i2c_add_driver+0x4a/0xd0
Oct 12 13:50:36 beecee kernel:
[__crc_md_unregister_thread+301310/3310281] tuner_init_module+0xf/0x20
[tuner]
Oct 12 13:50:36 beecee kernel: [sys_init_module+226/432]
sys_init_module+0xe2/0x1b0
Oct 12 13:50:36 beecee kernel: [syscall_call+7/11] syscall_call+0x7/0xb
################# /etc/modutils/ivtv #########################
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
# options ivtv cardtype=6 tuner=57,57 ivtv_std=1
install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb
################ ivtv stuff in dmesg ####################
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.0 (tagged release) loading
ivtv: Linux version: 2.6.8 K7 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based)
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 11 (level, low) -> IRQ 11
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60]
tda9885/6/7: chip found @ 0x86
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
tveeprom: Ignoring new-style parameters in presence of obsolete ones
tveeprom: Second (radio) tuner idx 101
tveeprom: ivtv version
tveeprom: Hauppauge: model = 23552, rev = D592, serial# = 8221235
tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
ivtv0: This is the first unit of a PVR500
cx25840: Ignoring new-style parameters in presence of obsolete ones
cx25840 6-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 6-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes)
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
wm8775: Ignoring new-style parameters in presence of obsolete ones
wm8775 6-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
ivtv0: loading /lib/modules/ivtv-fw-enc.bin
ivtv0: Encoder revision: 0x02040011
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
tuner: tuner type not set
ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
ivtv: ====================== NEXT CARD ======================
ivtv1: Autodetected WinTV PVR 150 card (iTVC16 based)
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 10 (level, low) -> IRQ 10
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61]
tda9885/6/7: chip found @ 0x86
ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43]
tveeprom: Second (radio) tuner idx 101
tveeprom: ivtv version
tveeprom: Hauppauge: model = 23552, rev = D592, serial# = 8221235
tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
cx25840 7-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
cx25840 7-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes)
ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44]
wm8775 7-001b: chip found @ 0x36 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b]
ivtv1: This is the second unit of a PVR500
ivtv1: Correcting tveeprom data: no radio present on second unit
ivtv1: loading /lib/modules/ivtv-fw-enc.bin
ivtv1: Encoder revision: 0x02040011
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
tuner: tuner type not set
ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
ivtv: ==================== END INIT IVTV ====================
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
