Not so good. Can you provide any insight?
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.0 (tagged release) loading
ivtv: Linux version: 2.6.12-1.1381_FC3 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv0: Unknown card: vendor/device: 4444/0016
ivtv0: subsystem vendor/device: 0270/8801
ivtv0: iTVC16 based
ivtv0: Defaulting to WinTV PVR 250 card
ivtv0: Please mail the vendor/device and subsystem vendor/device IDs
and what kind of
ivtv0: card you have to the ivtv-devel mailinglist: http://
sourceforge.net/projects/ivtv
ivtv0: Prefix your subject line with [UNKNOWN CARD].
PCI: Found IRQ 11 for device 0000:00:09.0
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tveeprom: Hauppauge: model = 26552, rev = C268, serial# = 8227334
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
msp3400: error while reading chip version
tda9885/6/7: chip found @ 0x86
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv0: loading /lib/modules/ivtv-fw-enc.bin
ivtv0: Encoder revision: 0x02040024
ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011
or 0x02050032.
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB
total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB
total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers
(2048KB total)
tuner 0-0061: type set to 47 (LG NTSC (TAPE series))
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40046403!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40046404!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40086d11!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40307603!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40046403!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40046406!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x4004760f!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40046406!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv0: Initialized WinTV PVR 250, card #0
ivtv: ==================== END INIT IVTV ====================
-Jason
Blog: http://jayslife.com
GPG Fingerprint:
[EMAIL PROTECTED] - A6CC 40B4 99A4 1C08 55A7 BCFC ECDF ED68
On 9-Nov-05, at 2:33 PM, Hans Verkuil wrote:
On Wednesday 09 November 2005 02:11, Jason McLeod wrote:
Is there a build that I can use that will support this new PCI ID?
So I can verify that the fix works? :)
It's in the 0.4.0 release:
http://dl.ivtvdriver.org/ivtv/archive/0.4.x/ivtv-0.4.0.tar.gz
Hans
-Jason
Blog: http://jayslife.com
GPG Fingerprint:
[EMAIL PROTECTED] - A6CC 40B4 99A4 1C08 55A7 BCFC ECDF ED68
On 2-Oct-05, at 12:47 PM, Hans Verkuil wrote:
On Sunday 02 October 2005 18:37, Jason McLeod wrote:
This is supposed to be a Hauppauge PVR 150MCE. But the regular
drivers don't seem to be detecting it properly.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.8 (tagged release) loading
ivtv: Linux version: 2.6.12-1.1447_FC4 686 REGPARM 4KSTACKS
gcc-4.0 ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Unknown card: vendor/device: 4444/0016
ivtv: subsystem vendor/device: 0270/0801
Normally the Hauppauge PCI ID is 0070, not 0270. Weird. Oh well,
I'll add it
to the card list. Thanks!
Hans
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
