Hi everyone Works fine now!
After trying various versions and getting some strange results, I retried SVN-2945 including updating the v4l code and now it works fine. I can only assume that something changed in the v4l code whilst I was trying different versions of ivtv, because I have not changed anything on my computer since I last tried SVN-2945. Best Regards Trev On Monday 14 Nov 2005 23:07, Trev Jackson wrote: > Hi > > I am using my Adaptec AVC-2410 card and have found the following problems > with ivtv-0.50: > > I have found that svn-2849 has video and sound working, svn-2850 has video > working, but no sound. > > I have not got as far as finding at what version the problem with a file > size of zero occurs, although ivtv-2940 works (no sound) and ivtv-2945 does > not. > > I will investigate further > > Best Regards > > Trev > > On Saturday 12 Nov 2005 17:10, you wrote: > > Hi > > > > I downloaded svn version 2945 and am getting a zero sized file from > > > > cat /dev/video0 > test.mpg. > > > > I am using the following parameters > > > > modprobe tuner ignore=0,0x6b > > modprobe ivtv ivtv_std=2 > > sleep 1 > > ivtvctl -q0 > > ivtvctl -p4 > > modprobe lirc_i2c > > sleep 1 > > lircd -d /dev/lirc0 --permission=666 > > > > I am then using ptune-ui.pl to set the channel. > > > > I will try some of the earlier versions to find at what point it stops > > working, I just thought I should send an email to let you know I have a > > problem. 2836 is the last version I had run before this (worked ok). > > > > The dmesg log is below. > > > > Best Regards > > > > Trev > > > > tuner: Ignoring new-style parameters in presence of obsolete ones > > Linux video capture interface: v1.00 > > tveeprom: Ignoring new-style parameters in presence of obsolete ones > > ivtv: ==================== START INIT IVTV ==================== > > ivtv: version 0.5.1 (development revision 2944) loading > > ivtv: Linux version: 2.6.8.1-12mdk 686 gcc-3.4 > > ivtv: In case of problems please include the debug info between > > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > > ivtv: any module options, when mailing the ivtv-users mailinglist. > > ivtv0: Autodetected Adaptec VIDEOH! AVC-2410 card (cx23416 based) > > PCI: Found IRQ 10 for device 0000:00:0e.0 > > PCI: Sharing IRQ 10 with 0000:00:05.0 > > PCI: Sharing IRQ 10 with 0000:00:07.0 > > PCI: Sharing IRQ 10 with 0000:00:09.2 > > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > > tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 > > All bytes are equal. It is not a TEA5767 > > ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60] > > saa7115: Ignoring new-style parameters in presence of obsolete ones > > saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) > > ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] > > msp3400: Ignoring new-style parameters in presence of obsolete ones > > msp34xx: ivtv version > > msp34xx: init: chip=MSP3415G-B8, has NICAM support, simple (D) mode, > > simpler (G) no-thread mode > > msp34xx: $Id$ compiled on: Oct 9 2005 13:35:29 > > ivtv0: i2c attach to card #0 ok [client=MSP3415G-B8, addr=40] > > cs53l32a: Ignoring new-style parameters in presence of obsolete ones > > cs53l32a 0-0011: chip found @ 0x22 (ivtv i2c driver #0) > > ivtv0: i2c attach to card #0 ok [client=cs53l32a, addr=11] > > tda9887: Ignoring new-style parameters in presence of obsolete ones > > tda9885/6/7: (ivtv) chip found @ 0x86 > > ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] > > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > > ivtv0: Encoder revision: 0x02030015 > > ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011 or > > 0x02050032. > > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB > > total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers > > (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers > > (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 > > buffers (2048KB total) > > tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv > > i2c driver #0 > > ivtv0: Initialized Adaptec VIDEOH! AVC-2410, card #0 > > ivtv: ==================== END INIT IVTV ==================== > > lirc_dev: IR Remote Control driver registered, at major 61 > > bttv: driver version 0.9.16 loaded > > bttv: using 8 buffers with 2080k (520 pages) each for capture > > rivatv: Video4Linux driver for NVIDIA cards > > rivatv: Version 0.8.5 > > rivatv: MMX processor extension enabled > > cx2388x v4l2 driver version 0.0.5 loaded > > lirc_i2c: chip found @ 0x6b (Adaptec IR) > > ivtv0: i2c attach to card #0 ok [client=Adaptec IR, addr=6b] > > lirc_dev: lirc_register_plugin: sample_rate: 10 > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
