Got it working by removing the console frame buffer. Still do not understand it though....
One problem remaining: - DVB-S MPEG2 recordings play only partly: i get video OK, but no audio. - same when i do live-TV from one of the SAT tuners. Cheers, Rudy Rudy Zijlstra wrote: >Joe Votour wrote: > > > >>--- Rudy Zijlstra <[EMAIL PROTECTED]> wrote: >> >> >> >> >> >>>This time to the correct list.... >>> >>> >>> >>> >>>>Date: Sun, 15 Jan 2006 02:24:20 +0100 >>>> >>>> >>>> >>>> >>>From: Rudy Zijlstra <[EMAIL PROTECTED]> >>>To: ivtv-devel@lists.sourceforge.net >>>Subject: X problems with 0.4.1 >>> >>>Hello, >>> >>>building a new Myth frontend with PVR350 TV out. >>> >>>I'm stuck on the following message from xorg: >>> >>>(--) Chipset PVR-350 found >>>(EE) ivtvHWProvbe failed to do >>>IVTVFB_IOCTL_GET_STATE for device (null) >>>(EE) Screen 0 deleted because of no matching config >>>section. >>>(II) UnloadModule: "ivtvdev" >>>(EE) Device(s) detected, but none match those in the >>>config file. >>> >>>I'm very open to suggestions on how to solve this. >>> >>>Cheers, >>> >>>Rudy >>> >>>Needed config info: >>> >>>The information from dmesg: >>> >>>ivtv: ==================== START INIT IVTV >>>==================== >>>ivtv: version 0.4.1 (tagged release) loading >>>ivtv: Linux version: 2.6.14 preempt PENTIUM4 >>>gcc-3.3 >>>ivtv: In case of problems please include the debug >>>info between >>>ivtv: the START INIT IVTV and END INIT IVTV lines, >>>along with >>>ivtv: any module options, when mailing the >>>ivtv-users mailinglist. >>>ivtv0: Autodetected WinTV PVR 350 card (cx23415 >>>based) >>>ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKC] >>>-> GSI 10 (level, >>>low) -> IRQ 10 >>>ivtv0: i2c attach to card #0 ok [client=tveeprom, >>>addr=50] >>>tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) >>>ivtv0: i2c attach to card #0 ok [client=(tuner >>>unset), addr=61] >>>saa7115 0-0021: ivtv driver >>>saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c >>>driver #0) >>>ivtv0: i2c attach to card #0 ok [client=saa7115, >>>addr=21] >>>saa7127 0-0044: ivtv driver >>>saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c >>>driver #0) >>>ivtv0: i2c attach to card #0 ok [client=saa7127, >>>addr=44] >>>msp34xx: init: chip=MSP3418W-A2 +nicam +simple >>>+simpler +radio mode=simpler >>>msp34xxg: daemon started >>>ivtv0: i2c attach to card #0 ok [client=MSP3418W-A2, >>>addr=40] >>>tveeprom 0-0050: Hauppauge model 48134, rev J347, >>>serial# 7014191 >>>tveeprom 0-0050: tuner model is LG TP18PSB01D (idx >>>47, type 28) >>>tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04) >>>tveeprom 0-0050: audio processor is MSP4418 (idx 25) >>>tveeprom 0-0050: decoder processor is SAA7115 (idx >>>19) >>>tveeprom 0-0050: has radio, has IR remote >>>ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 >>>bytes) >>>ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 >>>bytes) >>>ivtv0: Encoder revision: 0x02040011 >>>ivtv0: Decoder revision: 0x02020023 >>>ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 >>>buffers (4096KB total) >>>ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 >>>buffers (2048KB total) >>>ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 >>>buffers (2048KB total) >>>ivtv0: Allocate DMA encoder PCM audio stream: 455 x >>>4608 buffers (2048KB >>>total) >>>ivtv0: Create encoder radio stream >>>ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 >>>buffers (1024KB total) >>>ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 >>>buffers (1024KB total) >>>ivtv0: Create decoder VOUT stream >>>ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 >>>buffers (1024KB total) >>>ivtv0: loaded v4l-cx2341x-init-mpeg.bin firmware >>>(155648 bytes) >>>tuner 0-0061: type set to 28 (LG PAL_BG+FM >>>(TPI8PSB01D)) >>>ivtv0: Initialized WinTV PVR 350, card #0 >>>ivtv: ==================== END INIT IVTV >>>==================== >>>ivtv0-osd: Framebuffer module loaded (attached to >>>ivtv card id 0) >>>ivtv0-osd warning: Framebuffer is at >>>decoder-relative address 0x00510000 >>>and has 1704960 bytes. >>>ivtv0-osd: screen coords: [0 0] -> [720 576] >>>ivtv0-osd: original global alpha = 208 >>>ivtv0-osd: current OSD state = 39 >>>ivtv0-osd: new global alpha = 208 (1 255 0) >>>ivtv0-osd: framebuffer at 0xf9510000, mapped to >>>0xd1b90000, size 1620k >>>ivtv0-osd: mode is 720x576x32, linelength=2880 >>>ivtv0-osd: fb1: cx23415 TV out frame buffer device >>> >>> >>> >>> >=> See xorg.conf entry below which points to /dev/fb1 > > > >>>ivtv0: Allocate DMA decoder OSD stream: 16 x 65536 >>>buffers (1024KB total) >>> >>> >>> >>> >>> >>> >>>>_______________________________________________ >>>> >>>> >>>> >>>> >>>ivtv-devel mailing list >>>ivtv-devel@ivtvdriver.org >>>http://ivtvdriver.org/mailman/listinfo/ivtv-devel >>> >>> >>> >>> >>Is your PCI bus ID (the line BusID) correct for your >>PVR-350? You also have the correct framebuffer >>(/dev/fbx) device, right? >> >>Both of these will keep XFree86 from working. >> >>Additionally, we need to see the "Monitor" section to >>make sure that everything points to the correct >>places. >> >>-- Joe >> >> >> >> >> >lspci: >02:09.0 Multimedia video controller: Internext Compression Inc iTVC15 >MPEG-2 Encoder (rev 01) > >xorg.conf: > >Section "Device" > Identifier "Hauppage PVR350" > Driver "ivtvdev" > Option "ivtvdev" "/dev/fb1" > BusID "PCI:2:9:0" >EndSection > > >Section "Monitor" > Identifier "PAL TV" > HorizSync 30-68 > VertRefresh 50-120 > DisplaySize 240 180 > Mode "720x576" > DotClock 42.6 > HTimings 720 760 832 944 > VTimings 576 577 580 602 > Flags "-HSync" "-VSync" > EndMode >EndSection > >Section "Screen" > Identifier "TV" > Device "Hauppage PVR350" > Monitor "PAL TV" > DefaultDepth 24 > DefaultFbbpp 32 > Subsection "Display" > Depth 24 > FbBpp 32 > Modes "720x576" > EndSubsection >EndSection > >Section "ServerLayout" > > Identifier "Simple Layout" > Screen "TV" > InputDevice "Mouse1" "CorePointer" > InputDevice "Keyboard1" "CoreKeyboard" > >EndSection > > >_______________________________________________ >ivtv-devel mailing list >ivtv-devel@ivtvdriver.org >http://ivtvdriver.org/mailman/listinfo/ivtv-devel > > > _______________________________________________ ivtv-devel mailing list ivtv-devel@ivtvdriver.org http://ivtvdriver.org/mailman/listinfo/ivtv-devel
