On Sunday 05 February 2006 05:20, Jason Pyeron wrote: > I am looking for any suggestions on this one. > Is there any place where the registers are documented?
http://dl.ivtvdriver.org/datasheets/ You need the datasheet of the cx25840, which is the video chip used by the pvr150. I have no idea what is wrong here, you may have to experiment. Hans > > thanks in advance > > -Jason > > On Fri, 3 Feb 2006, Jason Pyeron wrote: > > I am having a bit of difficulty using the PVR-150 to capture video > > from a security camera. The camera is a high-res camera [Tatung > > TFD-CVH39AI24 IR, > > http://www.tatungusa.com/tatungusa/products_services/products/cctv/ > >camera/IR.htm]. > > > > When capturing video, there is a horizontal scroll. The scroll > > speeds up and slows down, sometimes it slows down until it goes > > away for a minute or so. There is never any vertical scroll. See > > attached JPEG or http://client.pdinc.us/example.jpg and > > http://client.pdinc.us/example.mpg > > > > I am working with Hauppauge tech support, but it is not going very > > far. What we have been able to do is to install windows on the > > system and do a proof of concept. It does not have this problem > > under windows. > > > > I am lost on using ivtvctl for the solution. Would I be correct in > > assuming that there is a register that needs to be set? > > > > -jason pyeron _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
