Running gentoo Linux, 2.6.13-gentoo-r3 with ivtv 0.4.0 I just added a new PVR-150 card to my existing PVR-350. The 350 works great but the 150 only gives static. I spotted the following in the kernel messages:
... vtv0: Autodetected WinTV PVR 150 card (iTVC16 based) PCI: Found IRQ 9 for device 0000:02:09.0 PCI: Sharing IRQ 9 with 0000:01:00.0 PCI: Sharing IRQ 9 with 0000:02:0b.0 tveeprom: ivtv version tveeprom: Hauppauge: model = 26552, rev = F0A3, serial# = 8919104 tveeprom: tuner = TCL MFNM05-4 (idx = 103, type = 4) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) ... tuner: type set to 4 (NoTuner) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 150, card #0 Does this mean the tuner is not supported yet? On the users list another poster indicated they had the same problem with ivtv-0.4.2. Thanks. Linux video capture interface: v1.00 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.0 (tagged release) loading ivtv: Linux version: 2.6.13-gentoo-r3 preempt PENTIUMIII gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based) PCI: Found IRQ 9 for device 0000:02:09.0 PCI: Sharing IRQ 9 with 0000:01:00.0 PCI: Sharing IRQ 9 with 0000:02:0b.0 tveeprom: ivtv version tveeprom: Hauppauge: model = 26552, rev = F0A3, serial# = 8919104 tveeprom: tuner = TCL MFNM05-4 (idx = 103, type = 4) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 0-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes) ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9885/6/7: (ivtv) chip found @ 0x86 ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv0: loading /lib/modules/ivtv-fw-enc.bin ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream tuner: type set to 4 (NoTuner) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 150, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected WinTV PVR 350 card (iTVC15 based) PCI: Found IRQ 9 for device 0000:02:0b.0 PCI: Sharing IRQ 9 with 0000:01:00.0 PCI: Sharing IRQ 9 with 0000:02:09.0 tveeprom: ivtv version tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 7997586 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = MSP4448 (type = 1b) tveeprom: decoder processor = SAA7115 (type = 13) ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61] tda9885/6/7: (ivtv) chip found @ 0x86 ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43] saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=saa7115, addr=21] saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=saa7127, addr=44] msp34xx: ivtv version msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Jan 7 2006 21:26:21 ivtv1: i2c attach to card #1 ok [client=MSP3448W-A2, addr=40] ivtv1: loading /lib/modules/ivtv-fw-enc.bin ivtv1: loading /lib/modules/ivtv-fw-dec.bin ivtv1: Encoder revision: 0x02050032 ivtv1: Decoder revision: 0x02020023 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv1: Create encoder radio stream ivtv1: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv1: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv1: Create decoder VOUT stream ivtv1: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total) ivtv1: loading /lib/modules/ivtv_init_mpeg.bin tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #1 spurious 8259A interrupt: IRQ7. ivtv1: Initialized WinTV PVR 350, card #1 ivtv: ==================== END INIT IVTV ==================== -- DS _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
