I am not a mailing list member. Dear IVTV Developers,
I have a card that is identified by ivtv as a PVR-250. I have not had success with it yet. I have not yet used GATOS drivers. dmesg output requested posting the IVTV init information to this mailing list address. I would appreciate any assistance. I cannot identify the subvendor PCI id for the Theater200 chip. Best Regards. [EMAIL PROTECTED] g mai l .com Physical description: PCI Bus. No audio input/output jacks on board. external inputs: Composite, S-Video, CATV, audio (mini-jack) Chips/info on circuit board: Philips: 3139 14718921D# FI1236/W H-3 Conexant CX23416-12 MPEG II A/V Encoder ATI Theater200 213T20ZQA12 printed on board: PN 109-A3800-01 kernel: ivtv: ==================== START INIT IVTV ==================== kernel: ivtv: version 0.4.1 (tagged release) loading kernel: ivtv: Linux version: 2.6.13-1.1526_FC4 686 REGPARM 4KSTACKS gcc-4.0 kernel: ivtv: In case of problems please include the debug info between kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. kernel: ivtv0: Unknown card: vendor/device: 4444/0016 kernel: ivtv0: subsystem vendor/device: 1002/fffb kernel: ivtv0: cx23416 based kernel: ivtv0: Defaulting to WinTV PVR 250 card kernel: ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of kernel: ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) kernel: ivtv0: Prefix your subject line with [UNKNOWN CARD]. kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 kernel: ivtv0 warning: i2c client addr: 0x50 not found for command 0x0! kernel: ivtv0: Error -19 reading Hauppauge eeprom. kernel: ivtv0: Possible causes: the tveeprom module was not loaded, or kernel: ivtv0: the eeprom kernel module was loaded before the tveeprom module. kernel: ivtv0 warning: i2c client addr: 0x21 not found for command 0x8004646b! kernel: ivtv0: Could not detect tuner standard, defaulting to NTSC. kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) kernel: ivtv0: Encoder revision: 0x02050032 kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) kernel: ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) kernel: ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) kernel: ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618! kernel: ivtv0 warning: i2c client addr: 0x21 not found for command 0xc0045627! kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40086d11! kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610! kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611! kernel: ivtv0 warning: i2c client addr: 0x00 not found for command 0x40085618! kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40085618! kernel: ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618! kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610! kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611! kernel: ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045613! kernel: ivtv0 warning: i2c client addr: 0x00 not found for command 0x402c5639! kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x402c5639! kernel: ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045612! kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610! kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611! kernel: ivtv0: Initialized WinTV PVR 250, card #0 kernel: ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
