Using ivtv-0.4.3 on vanilla kernel 2.6.15.6. This card is a PVR-150. Card's full name and model: AVerMedia MTVPVR15P PCI Interface AverTV PVR 150 Plus
A link to the card on Newegg: http://www.newegg.com/Product/Product.asp?Item=N82E16815100135 lspci output: 0000:02:06.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) dmesg output: [ 293.371256] ivtv: ==================== START INIT IVTV ==================== [ 293.371331] ivtv: version 0.4.3 (tagged release) loading [ 293.371385] ivtv: Linux version: 2.6.15.6 preempt gcc-4.0 [ 293.371438] ivtv: In case of problems please include the debug info between [ 293.371506] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [ 293.371572] ivtv: any module options, when mailing the ivtv-users mailinglist. [ 293.372516] ivtv0: Unknown card: vendor/device: 4444/0016 [ 293.372577] ivtv0: subsystem vendor/device: 1461/c035 [ 293.372638] ivtv0: cx23416 based [ 293.372695] ivtv0: Defaulting to WinTV PVR 250 card [ 293.372744] ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of [ 293.372828] ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) [ 293.372902] ivtv0: Prefix your subject line with [UNKNOWN CARD]. [ 293.373197] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 293.373263] GSI 20 sharing vector 0xD1 and IRQ 20 [ 293.373315] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20 [ 293.373415] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 293.402492] ivtv0 warning: i2c client addr: 0x50 not found for command 0x0! [ 293.402568] ivtv0: Error -19 reading Hauppauge eeprom. [ 293.402619] ivtv0: Possible causes: the tveeprom module was not loaded, or [ 293.402689] ivtv0: the eeprom kernel module was loaded before the tveeprom module. [ 293.412882] tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 [ 293.413477] TEA5767 detected. [ 293.413509] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60] [ 293.416162] tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect [ 293.416238] type set to 62 (Philips TEA5767HN FM Radio) [ 293.416391] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 [ 293.416461] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] [ 293.514447] ivtv0 warning: i2c client addr: 0x21 not found for command 0x8008646b! [ 293.548637] ivtv0: Could not detect tuner standard, defaulting to NTSC. [ 293.548709] ivtv0: Detected a TEA5767 radio tuner. Enabling radio support. [ 293.914687] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) [ 294.018074] ivtv0: Encoder revision: 0x02050032 [ 294.018795] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) [ 294.019614] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) [ 294.020463] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) [ 294.021260] ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) [ 294.022246] ivtv0: Create encoder radio stream [ 294.022314] ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618! [ 294.022388] ivtv0 warning: i2c client addr: 0x21 not found for command 0xc0045627! [ 294.022462] ivtv0 warning: i2c client addr: 0x40 not found for command 0x40086d11! [ 294.022535] ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610! [ 294.022608] ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611! [ 294.022682] ivtv0 warning: i2c client addr: 0x40 not found for command 0x40085618! [ 294.022755] ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618! [ 294.022829] ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610! [ 294.022902] ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611! [ 294.026066] ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045613! [ 294.026147] tuner: tuner type not set [ 294.026188] ivtv0 warning: i2c client addr: 0x40 not found for command 0x402c5639! [ 294.026280] ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045612! [ 294.080006] ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610! [ 294.080087] ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611! [ 294.080166] ivtv0: Initialized WinTV PVR 250, card #0 [ 294.080224] ivtv: ==================== END INIT IVTV ==================== -- Vic Fryzel (vic at shellsage dot com) http://shellsage.com/ Key id C7B780CA = 3235 2261 807B 451C DA4D DFBA CAA7 80CF C7B7 80CA
pgp3lqQIVPlkF.pgp
Description: PGP signature
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
