with attachments!
Hans,
I just migrated from 2.6.15 / ivtv-0.4 --> 2.6.16 / pre-ivtv-0.6 and
ran into a problem with MythTV - I don't know if this is something
IVTV-related or if I should take this and post it to mythtv-dev, but
I figured I would try here first.
MythTV used to see my PVR-350's cable tuner as "Tuner 0" it now only
sees a "Tuner 1."This caused a problem because after upgrading,
MythTV could not record or play live TV, see attachment. Recreating
my tuner card in mythtv-setup and choosing "Tuner 1" it all works again.
I am just wondering what would have caused the PVR350's only Tuner
(and the only tuner in my system) to have changed itself from #0 to
#1 in MythTV, but as far as /dev/v4l land goes, everything has the
same name.
-Rick
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.6.0 (development snapshot compiled on Mon Mar 20 18:42:30
2006) loading
ivtv: Linux version: 2.6.16 SMP preempt PENTIUMII gcc-3.3
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based)
ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 16 (level, low) -> IRQ 193
saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
msp3400 1-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
msp3400 1-0040: MSP4448G-A2 supports radio, mode is autodetect and autoselect
tveeprom 1-0050: Hauppauge model 48132, rev J323, serial# 6813565
tveeprom 1-0050: tuner model is Philips FM1236 (idx 23, type 2)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is MSP4448 (idx 27)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has radio, has IR remote
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner 1-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0)
ivtv0-osd: screen coords: [0 0] -> [720 480]
ivtv0-osd: original global alpha = 208
ivtv0-osd: current OSD state = 39
ivtv0-osd: new global alpha = 208 (1 255 0)
ivtv0-osd: framebuffer at 0xdd510000, mapped to 0xd9910000, size 1665k
ivtv0-osd: mode is 720x480x32, linelength=2880
ivtv0-osd: fb0: cx23415 TV out frame buffer device
ivtv0: Allocate DMA decoder OSD stream: 16 x 65536 buffers (1024KB total)
ivtv0-osd warning: ivtvfb_check_var
ivtv0-osd warning: ivtvfb_check_var
ivtv0-osd warning: ivtvfb_set_par
2006-03-20 18:55:00.797 TVRec(1): Changing from None to WatchingLiveTV
2006-03-20 18:55:00.803 ChannelBase: Could not find input: Tuner 0 on card when
setting channel 7
2006-03-20 18:55:00.804 TVRec(1) Error: Failed to set channel to 7.
2006-03-20 18:55:00.847 TVRec(1) Error: Channel: '' was not found in the
database.
Most likely, your DefaultTVChannel setting is wrong.
Could not start livetv.
2006-03-20 18:55:00.849 TVRec(1) Error: CreateLiveTVRingBuffer() failed
2006-03-20 18:55:00.850 TVRec(1) Error: Failed to create RingBuffer 2
2006-03-20 18:55:00.853 TVRec(1): Changing from WatchingLiveTV to None
On Mar 20, 2006, at 6:18 PM, Hans Verkuil wrote:
I've prepared a prerelease source archive for ivtv-0.6. ivtv-0.6 is
for
the 2.6.16 kernel ONLY. It really requires 2.6.16 functionality.
You can either get the sources from the svn 0.6 branch, but since
ivtvdriver.org is quite slow (hosted on atrpms.net where the whole
world seems to be downloading FC5) I've also made it available here:
http://www.xs4all.nl/~hverkuil/ivtv-0.6-pre.tar.gz
Please let me know of any problems you find. Tomorrow I intend to
update
the changelog and make the release.
Soon after I hope to release ivtv-0.4.4 for kernels <= 2.6.15. That
release will contain a few bug fixes, nothing major.
Hans
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
