On Wednesday 24 May 2006 15:58, Thomas Schmitz wrote: Sorry, I just noticed the logs are not really readable due to wrapping.
WORKING (compiled with gcc-4.0 on SuSE 10.0 running on SuSE 10.1): ------------------------------------------------------------------------ ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.6.3 (development revision 3288) loading ivtv: Linux version: 2.6.16.2-smp-diavolo SMP gcc-4.0 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 GSI 21 sharing vector 0xD9 and IRQ 21 ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 21 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) saa7127 5-0044: detecting saa7127 client on address 0x88 saa7127 5-0044: Configuring encoder saa7127 5-0044: Selecting 60 Hz video Standard saa7127 5-0044: Selecting S-Video + Composite output type saa7127 5-0044: Selecting Normal Encoder Input saa7127 5-0044: Enable Video Output saa7127 5-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) tveeprom 5-0050: full 256-byte eeprom dump: tveeprom 5-0050: 00: 84 09 00 04 20 77 00 40 af 86 6c 00 73 05 99 00 tveeprom 5-0050: 10: 84 08 00 06 06 bc 00 00 17 35 a9 72 07 70 73 09 tveeprom 5-0050: 20: 13 5f 73 0a 04 2f 73 0b 59 8c 72 0e 01 72 0f 01 tveeprom 5-0050: 30: 72 10 01 72 11 00 79 31 00 00 00 00 00 00 00 00 tveeprom 5-0050: 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 tveeprom 5-0050: 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 tveeprom 5-0050: 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 tveeprom 5-0050: 70: 00 00 00 00 00 00 00 00 00 00 00 00 13 eb 00 70 tveeprom 5-0050: 80: 84 09 00 04 20 77 00 40 af 86 6c 00 73 05 99 00 tveeprom 5-0050: 90: 84 08 00 06 06 bc 00 00 17 35 a9 72 07 70 73 09 tveeprom 5-0050: a0: 13 5f 73 0a 04 2f 73 0b 59 8c 72 0e 01 72 0f 01 tveeprom 5-0050: b0: 72 10 01 72 11 00 79 31 00 00 00 00 00 00 00 00 tveeprom 5-0050: c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 tveeprom 5-0050: d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 tveeprom 5-0050: e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 tveeprom 5-0050: f0: 00 00 00 00 00 00 00 00 00 00 00 00 13 eb 00 70 tveeprom 5-0050: Tag [04] + 8 bytes: 20 77 00 40 af 86 6c 00 tveeprom 5-0050: Tag [05] + 2 bytes: 99 00 tveeprom 5-0050: Tag [06] + 7 bytes: 06 bc 00 00 17 35 a9 tveeprom 5-0050: Tag [07] + 1 bytes: 70 tveeprom 5-0050: Tag [09] + 2 bytes: 13 5f tveeprom 5-0050: Tag [0a] + 2 bytes: 04 2f tveeprom 5-0050: Tag [0b] + 2 bytes: 59 8c tveeprom 5-0050: Tag [0e] + 1 bytes: 01 tveeprom 5-0050: Tag [0f] + 1 bytes: 01 tveeprom 5-0050: Tag [10] + 1 bytes: 01 tveeprom 5-0050: Not sure what to do with tag [10] tveeprom 5-0050: Tag [11] + 1 bytes: 00 tveeprom 5-0050: Not sure what to do with tag [11] tveeprom 5-0050: Hauppauge model 48134, rev J347, serial# 7112367 tveeprom 5-0050: tuner model is LG TP18PSB01D (idx 47, type 28) tveeprom 5-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 5-0050: audio processor is MSP4418 (idx 25) tveeprom 5-0050: decoder processor is SAA7115 (idx 19) tveeprom 5-0050: has radio, has IR remote tuner 5-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 5-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) msp3400 5-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0) msp3400 5-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect and autoselect ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Decoder revision: 0x02020023 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv0: Create decoder VOUT stream ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 5-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D)) saa7127 5-0044: Selecting 50 Hz video Standard ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ==================== END INIT IVTV ==================== NOT WORKING (compiled with gcc-4.1 on SuSE 10.1 running on SuSE 10.1): ---------------------------------------------------------------------------- ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.6.3 (development revision 3288) loading ivtv: Linux version: 2.6.16.2-smp-diavoloSL101 SMP gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 GSI 21 sharing vector 0xD9 and IRQ 21 ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 21 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) saa7127 5-0044: detecting saa7127 client on address 0x88 saa7127 5-0044: saa7127 not found tveeprom 5-0050: full 256-byte eeprom dump: tveeprom 5-0050: 00: ff 00 00 00 00 ff 00 00 ff ff ff ff ff ff ff ff tveeprom 5-0050: 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tveeprom 5-0050: 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tveeprom 5-0050: 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tveeprom 5-0050: 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tveeprom 5-0050: 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tveeprom 5-0050: 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tveeprom 5-0050: 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tveeprom 5-0050: 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tveeprom 5-0050: 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tveeprom 5-0050: a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tveeprom 5-0050: b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tveeprom 5-0050: c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tveeprom 5-0050: d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tveeprom 5-0050: e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tveeprom 5-0050: f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tveeprom 5-0050: Encountered bad packet header [ff]. Corrupt or not a Hauppauge eeprom. ivtv0: No tuner detected, default to NTSC msp3400 5-0040: MSP18431O-A31 found @ 0x80 (ivtv i2c driver #0) msp3400 5-0040: MSP18431O-A31 supports radio, mode is autodetect and autoselect msp3400 5-0044: [EMAIL PROTECTED] found @ 0x88 (ivtv i2c driver #0) msp3400 5-0044: [EMAIL PROTECTED] supports radio, mode is autodetect and autoselect ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Decoder revision: 0x02020023 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv0: Create decoder VOUT stream ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) ivtv0: i2c addr 0x21 not found for command 0x40045613! ivtv0: i2c addr 0x21 not found for command 0xc0045627! ivtv0: i2c addr 0x21 not found for command 0x40045612! ivtv0: i2c addr 0x21 not found for command 0x40045613! ivtv0: i2c addr 0x21 not found for command 0x40045612! ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
