Hello
for me oki ivtv-0.4.6:)
conf: debian testing Linux debian 2.6.15 lirc-0.8.0 pvr150 freevo
[EMAIL PROTECTED]:~$ ivtv-detect
driver: ivtv-0.4.6 (development snapshot compiled on jeu 15 jun 2006
21:50:56 CEST)
card: WinTV PVR 150, bus info 0000:00:0b.0, ivtv card #0
hardware: cx25840 tda9887 wm8775 tveeprom
/dev/video0: MPG encoding
/dev/vbi0: VBI encoding
/dev/video24: PCM encoding
/dev/video32: YUV encoding
[EMAIL PROTECTED]:~$
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.6 (development snapshot compiled on jeu 15 jun 2006
21:50:56 CEST) loading
ivtv: Linux version: 2.6.15 686 gcc-4.0
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 185
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: ivtv version
tveeprom: Hauppauge: model = 26039, rev = C1A5, serial# = 8295386
tveeprom: tuner = TCL MPE05-2 (idx = 105, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom =
0x74, v4l2 = 0x00400e17)
tveeprom: audio processor = CX25842 (type = 24)
tveeprom: decoder processor = CX25842 (type = 1d)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
cx25840 1-0044: ivtv driver
cx25840 1-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
irda_init()
NET: Registered protocol family 23
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
USB Universal Host Controller Interface driver v2.3
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: PC Speaker as /class/input/input0
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA P4M800CE chipset
agpgart: AGP aperture is 64M @ 0xf8000000
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 193
cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
tda9887 1-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv
i2c driver #0
ivtv0: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
[EMAIL PROTECTED]:~$
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel