I've upgraded my kernel to 2.6.16-1.2108 using Fedora 4. I updated the ivtv module using the rpms from atrpms-testing. When loading the modules, I get the follwoing:
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.0 (development snapshot compiled on Sat May 6 05:27:35 2006) loading ivtv: Linux version: 2.6.16-1.2108_FC4 686 REGPARM 4KSTACKS gcc-4.0 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Unknown card: vendor/device: 4444/0016 ivtv0: subsystem vendor/device: 0070/37f1 ivtv0: cx23416 based ivtv0: Defaulting to Hauppauge WinTV PVR-150 card ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) ivtv0: Prefix your subject line with [UNKNOWN CARD]. PCI: Found IRQ 9 for device 0000:01:0a.0 PCI: Sharing IRQ 9 with 0000:01:07.0 tveeprom 0-0050: Hauppauge model 26552, rev F0A3, serial# 8370605 tveeprom 0-0050: tuner model is TCL MFNM05-4 (idx 103, type 43) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: audio processor is CX25843 (idx 37) tveeprom 0-0050: decoder processor is CX25843 (idx 30) tveeprom 0-0050: has radio, has no IR remote tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0) cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 0-0044: loaded v4l-cx25840.fw firmware (13353 bytes) wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02040024 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream tuner 0-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) PCI: Found IRQ 10 for device 0000:01:0b.0 PCI: Sharing IRQ 10 with 0000:00:1f.2 PCI: Sharing IRQ 10 with 0000:01:01.0 tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #1) tveeprom 1-0050: Hauppauge model 48132, rev K268, serial# 8551594 tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is MSP4448 (idx 27) tveeprom 1-0050: decoder processor is SAA7115 (idx 19) tveeprom 1-0050: has radio, has IR remote saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #1) saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #1) msp3400 1-0040: MSP4448G-B3 found @ 0x80 (ivtv i2c driver #1) msp3400 1-0040: MSP4448G-B3 supports radio, mode is autodetect and autoselect ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv1: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv1: Encoder revision: 0x02040024 ivtv1: Decoder revision: 0x02020023 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv1: Create encoder radio stream ivtv1: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv1: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv1: Create decoder VOUT stream ivtv1: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total) ivtv1: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 1-0061: type set to 47 (LG NTSC (TAPE series)) ivtv1: Initialized Hauppauge WinTV PVR-350, card #1 ivtv: ==================== END INIT IVTV ==================== I don't know if the unknown device is a real problem, but I"m having trouble with getting lirc to work against the PVR350 IR remote, and I'm up against a wall at this point. If you do notice that this is an issue, please let me know. I have a PVR 150 and a PVR350 in this box. Thanks. _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today - it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
