I tried out the ivtv-0.4.6 on my Slackware 10.2 (with Linux 2.4.32) and am still getting the 'make install' error. I'm not sure whether this release was supposed to have fixed that or not.
Since it is building correctly, and if I were to manually copy the files into there locations, what should I be looking at for options when running 'depmod' ??? [EMAIL PROTECTED]:~/ivtv-0.4.6# make install make -C driver install make[1]: Entering directory `/root/ivtv-0.4.6/driver' make SUBDIRS=/root/ivtv-0.4.6/driver -C /lib/modules/2.4.32/build modules make[2]: Entering directory `/usr/src/linux-2.4.32' make -C /root/ivtv-0.4.6/driver CFLAGS="-D__KERNEL__ -I/usr/src/linux- 2.4.32/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno- strict-aliasing -fno-common -fomit-frame-pointer -pipe -mpreferred- stack-boundary=2 -march=i686 -DMODULE" MAKING_MODULES=1 modules make[3]: Entering directory `/root/ivtv-0.4.6/driver' ld -m elf_i386 -e stext -r -o cx25840.o cx25840-core.o cx25840-audio.o cx25840-firmware.o cx25840-vbi.o ld -m elf_i386 -e stext -r -o ivtv.o ivtv-driver.o ivtv-fileops.o ivtv- i2c.o ivtv-streams.o ivtv-firmware.o ivtv-reset.o ivtv-gpio.o ivtv- queue.o ivtv-irq.o ivtv-mailbox.o ivtv-vbi.o ivtv-kthreads.o ivtv- audio.o ivtv-ioctl.o ivtv-controls.o ivtv-video.o ivtv-cards.o v4l1- compat.o ivtv-yuv.o ld -m elf_i386 -e stext -r -o ivtv-fb.o ivtv-osd.o ivtv-queue.o make[3]: Leaving directory `/root/ivtv-0.4.6/driver' make[2]: Leaving directory `/usr/src/linux-2.4.32' install -d /lib/modules/2.4.32/kernel/ivtv install -m 0644 /lib/modules/2.4.32/kernel/ivtv install: too few arguments Try `install --help' for more information. make[1]: *** [install] Error 1 make[1]: Leaving directory `/root/ivtv-0.4.6/driver' make: *** [install] Error 2 [EMAIL PROTECTED]:~/ivtv-0.4.6# ----- Original Message ----- From: Hans Verkuil <[EMAIL PROTECTED]> Date: Saturday, June 24, 2006 1:45 pm Subject: [ivtv-devel] IVTV News To: [email protected], [email protected] > Hi all, > > A short update: > > I've just release ivtv-0.4.6 and ivtv-0.6.3 for kernels <= 2.6.15 > and > 2.6.16 respectively. I hope to release ivtv-0.7.0 tomorrow for > kernel > 2.6.17. More information when I release ivtv-0.7.0. > > The new MPEG encoding API has been accepted into v4l-dvb and > should > appear in kernel 2.6.18, together with a cx2341x module that will > be > extended further to become the central module dealing with the > cx23415/6 MPEG chips. This means that the same code will be used > by > ivtv, pvrusb2 and cx88-blackbird, all MPEG cards using this chip > in > different configurations. > > This is a big step towards getting the driver into the kernel. > > Thanks, > > Hans > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
