Hi

I have been using IVTV with the Tuner for a while
and I have recently been attempting to try to get it
working with teh Composite input as well.  However
whatever I try, I cannot get the video or sound to
come from anywhere but the Tuner.

This is the case within MythTV and from the command
line (with 'ivtvctrl -p 2').  'ivtv-tune' and 'ivtvctl
-y mute=1' seem to work fine so everything is hooked
up OK and 'ivtvctrl -P' reports the correct input,
just nothing actually happens.

Kernel log is attached and no module options are
used.

Daniel


> 
> 
> Aug 20 16:23:45 dougal kernel: ivtv: 
> ==================== START INIT IVTV
> ====================
> Aug 20 16:23:45 dougal kernel: ivtv:  version 0.6.2
> (development snapshot compiled on Mon May 22
> 01:17:37
> 2006) loading
> Aug 20 16:23:45 dougal kernel: ivtv:  Linux version:
> 2.6.16-1.2122_FC5 686 REGPARM 4KSTACKS gcc-4.1
> Aug 20 16:23:45 dougal kernel: ivtv:  In case of
> problems please include the debug info between
> Aug 20 16:23:45 dougal kernel: ivtv:  the START INIT
> IVTV and END INIT IVTV lines, along with
> Aug 20 16:23:45 dougal kernel: ivtv:  any module
> options, when mailing the ivtv-users mailinglist.
> Aug 20 16:23:45 dougal kernel: ivtv0: Unknown card:
> vendor/device: 4444/0016
> Aug 20 16:23:45 dougal kernel: ivtv0:              
> subsystem vendor/device: 0070/37f3
> Aug 20 16:23:45 dougal kernel: ivtv0:              
> cx23416 based
> Aug 20 16:23:45 dougal kernel: ivtv0: Defaulting to
> Hauppauge WinTV PVR-150 card
> Aug 20 16:23:45 dougal kernel: ivtv0: Please mail
> the
> vendor/device and subsystem vendor/device IDs and
> what
> kind of
> Aug 20 16:23:45 dougal kernel: ivtv0: card you have
> to
> the ivtv-devel mailinglist (www.ivtvdriver.org)
> Aug 20 16:23:45 dougal kernel: ivtv0: Prefix your
> subject line with [UNKNOWN CARD].
> Aug 20 16:23:45 dougal kernel: ACPI: PCI Interrupt
> Link [LNKC] enabled at IRQ 5
> Aug 20 16:23:45 dougal kernel: ACPI: PCI Interrupt
> 0000:01:09.0[A] -> Link [LNKC] -> GSI 5 (level, low)
> -> IRQ 5
> Aug 20 16:23:45 dougal kernel: tveeprom 3-0050:
> Hauppauge model 26039, rev C155, serial# 7729516
> Aug 20 16:23:45 dougal kernel: tveeprom 3-0050:
> tuner
> model is Philips FQ1216ME MK3 (idx 55, type 38)
> Aug 20 16:23:46 dougal kernel: tveeprom 3-0050: TV
> standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
> (eeprom 0x74)
> Aug 20 16:23:46 dougal kernel: tveeprom 3-0050:
> audio
> processor is CX25842 (idx 36)
> Aug 20 16:23:46 dougal kernel: tveeprom 3-0050:
> decoder processor is CX25842 (idx 29)
> Aug 20 16:23:46 dougal kernel: tveeprom 3-0050: has
> no
> radio, has IR remote
> Aug 20 16:23:46 dougal kernel: Driver for 1-wire
> Dallas network protocol.
> Aug 20 16:23:46 dougal kernel: tuner 3-0061: chip
> found @ 0xc2 (ivtv i2c driver #0)
> Aug 20 16:23:46 dougal kernel: tda9887 3-0043: chip
> found @ 0x86 (ivtv i2c driver #0)
> Aug 20 16:23:46 dougal kernel: cx25840 3-0044:
> cx25842-23 found @ 0x88 (ivtv i2c driver #0)
> Aug 20 16:23:46 dougal kernel: USB Universal Host
> Controller Interface driver v2.3
> Aug 20 16:23:46 dougal kernel: cx25840 3-0044:
> loaded
> v4l-cx25840.fw firmware (16382 bytes)
> Aug 20 16:23:46 dougal kernel: wm8775 3-001b: chip
> found @ 0x36 (ivtv i2c driver #0)
> Aug 20 16:23:46 dougal kernel: ivtv0: loaded
> v4l-cx2341x-enc.fw firmware (262144 bytes)
> Aug 20 16:23:46 dougal kernel: ivtv0: Encoder
> revision: 0x02050032
> Aug 20 16:23:46 dougal kernel: ivtv0: Allocate DMA
> encoder MPEG stream: 128 x 32768 buffers (4096KB
> total)
> Aug 20 16:23:46 dougal kernel: ivtv0: Allocate DMA
> encoder YUV stream: 161 x 12960 buffers (2048KB
> total)
> Aug 20 16:23:47 dougal kernel: ivtv0: Allocate DMA
> encoder VBI stream: 80 x 26208 buffers (2048KB
> total)
> Aug 20 16:23:47 dougal kernel: ivtv0: Allocate DMA
> encoder PCM audio stream: 455 x 4608 buffers (2048KB
> total)
> Aug 20 16:23:47 dougal kernel: tuner 3-0061: type
> set
> to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
> Aug 20 16:23:47 dougal kernel: ivtv0: Initialized
> Hauppauge WinTV PVR-150, card #0
> Aug 20 16:23:47 dougal kernel: ivtv: 
> ====================  END INIT IVTV 
> ====================
> 
> 
>               
>
___________________________________________________________
> 
> Copy addresses and emails from any email account to
> Yahoo! Mail - quick, easy and free.
> http://uk.docs.yahoo.com/trueswitch2.html
> 



                
___________________________________________________________ 
All New Yahoo! Mail – Tired of [EMAIL PROTECTED]@! come-ons? Let our SpamGuard 
protect you. http://uk.docs.yahoo.com/nowyoucan.html

_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel

Reply via email to