ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.8.0 (v4l-dvb + ivtv virtual merge) Revision: 3384 loading ivtv: Linux version: 2.6.17.3 mod_unload 386 gcc-3.3 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) tveeprom 0-0050: Hauppauge model 32524, rev B248, serial# 6771745 tveeprom 0-0050: tuner model is LG TP18PSB11D (idx 48, type 29) tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 0-0050: audio processor is MSP3415 (idx 6) tveeprom 0-0050: decoder processor is SAA7115 (idx 19) tveeprom 0-0050: has no radio, has no IR remote tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) ivtv0: Encoder revision: 0x02050032 ivtv0: Registered device video0 for encoder MPEG ivtv0: Registered device video32 for encoder YUV ivtv0: Registered device vbi0 for encoder VBI ivtv0: Registered device video24 for encoder PCM audio tuner 0-0061: type set to 29 (LG PAL_BG (TPI8PSB11D)) ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c addr 0x44 not found for command 0x4008646f! ivtv0: i2c hardware 0x00000020 not found for command 0x4008646d! ivtv0: i2c hardware 0x00000001 not found for command 0x4008646d! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ====================
Kernel 2.6.17.3 + v4l-dvb HG from 06.07. + ivtv trunk Couldn't test 0.70 because it causes unresolved symbols when the v4l-dvb drivers are installed -- Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
