Your mail got lost somehow and only surfaced today.
Anyway, this is clearly new cx23416-based hardware. Can you give me more
information on this board? What chips are on it, what are the
connectors/features? A picture of the board may also be useful.
Hans
On Tuesday 18 July 2006 22:01, Todd Walter wrote:
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.7.0 (tagged release) loading
> ivtv: Linux version: 2.6.17.4 preempt mod_unload PENTIUM4 REGPARM
> gcc-4.1
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Unknown card: vendor/device: 4444/0016
> ivtv0: subsystem vendor/device: 1179/0001
> ivtv0: cx23416 based
> ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
> ivtv0: Please mail the vendor/device and subsystem vendor/device IDs
> and what kind of
> ivtv0: card you have to the ivtv-devel mailinglist
> (www.ivtvdriver.org) ivtv0: Prefix your subject line with [UNKNOWN
> CARD].
> ivtv0: No tuner detected, default to NTSC
> tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total)
> ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB
> total)
> ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB
> total)
> ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers
> (2048KB total)
> ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
> ivtv0: i2c addr 0x44 not found for command 0x4008646f!
> ivtv0: i2c hardware 0x00000020 not found for command 0x4008646d!
> ivtv0: i2c hardware 0x00000001 not found for command 0x4008646d!
> ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
> ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
> ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
> ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
> ivtv: ==================== END INIT IVTV ====================
>
> lspci -vv:
> 02:09.0 Multimedia video controller: Internext Compression Inc iTVC16
> (CX23416) MPEG-2 Encoder (rev 01)
> Subsystem: Toshiba America Info Systems Unknown device 0001
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32
> bytes Interrupt: pin A routed to IRQ 11
> Region 0: Memory at 9c000000 (32-bit, prefetchable)
> [size=64M] Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 00: 44 44 16 00 06 00 10 02 01 00 00 04 08 40 00 00
> 10: 08 00 00 9c 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 01 00
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 80 08
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
