/queue/scheduler where <disk> is each disk in your array or possibly the array itself (I don't have software raid running here so I am not sure if that shows up in the list) Here is a link that should help:
http://linux.inet.hr/cfq_to_become_the_default_i_o_scheduler.html. A second thought is to move your hauppage card to try to get it to not share interrupts with any other device in your system.
John
On 10/20/06, Todd Foggoa <[EMAIL PROTECTED]> wrote:
Hi Dave, I'm only running a single core (AMD Athlon(tm) 64 Processor 3000+).
Hi John, didn't see the "unusually low latency" message in my dmesg.
I double checked and my bios was set to a PCI latency of 64.
As a side note I noticed the bios I'm running is version 1008 and ASUS
seems to be up to version 1017(stable) and 1018.001(beta). I think
I'll give these BIOSes a try over the weekend to see if it helps.
Any other ideas? I'm willing to test anything. :)
Thanks,
-Todd
On 10/20/06, David Smith <[EMAIL PROTECTED]> wrote:
> Hi Todd,
>
> > On 10/20/06, Todd Foggoa < [EMAIL PROTECTED]> wrote:
> >
> > >
> > > Any other ideas?
> > >
> > >
> >
>
> I couldn't tell from your system description, but is your processor a
> dual-core? I have had trouble with my dual processor system and when I
> installed a single processor kernel, the problems went away. I don't think
> I saw problems so quickly, so you're probably dealing with the "classic" DMA
> problem, but I wanted to mention it.
>
> -Dave
>
>
>
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
>
>
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
--
John M. Drescher
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
