> For the record: it will work just fine as is. You can ignore these > warnings. > > Hans
I'm getting different messages and radio functionality whether I (1)Power-cycle or (2)Use the radio and then reboot or (3)use nothing then reboot. Let me explain further. I start the machine from a cold start, manually 'modprobe ivtv' and everything works. I can 'ivtv-radio -f 97.3', 'mplayer /dev/video0', 'mplayer /dev/video1' etc. I then issue a 'reboot', manually 'modprobe ivtv' and the radio doesn't register and I get the 'Unknown card..' messages. I then issue a 'poweroff', restart the PC, manually 'modprobe ivtv' and everything works again. Also... When the radio doesn't work on a reboot, I get 'ivtv0: This is the second unit of a PVR500' and 'ivtv1: This is the second unit of a PVR500' When the radio does work, I get: 'ivtv0: This is the first unit of a PVR500' 'ivtv1: This is the second unit of a PVR500' Is this weird or what?? Here's what I get with a Power cycle (all looks good): ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.8.0 (tagged release) loading ivtv: Linux version: 2.6.18-1.2200.fc5 mod_unload 686 REGPARM 4KSTACKS gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 17 (level, low) -> IRQ 169 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) tveeprom 0-0050: Hauppauge model 23559, rev D596, serial# 8859942 tveeprom 0-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73) tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 0-0050: audio processor is CX25843 (idx 37) tveeprom 0-0050: decoder processor is CX25843 (idx 30) tveeprom 0-0050: has radio, has no IR remote ivtv0: This is the first unit of a PVR500 tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 0-0060: TEA5767 detected. tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0) tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio) tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Encoder revision: 0x02050032 ivtv0: Registered device video0 for encoder MPEG ivtv0: Registered device video32 for encoder YUV ivtv0: Registered device vbi0 for encoder VBI ivtv0: Registered device video24 for encoder PCM audio ivtv0: Registered device radio0 for encoder radio tuner 0-0061: type set to 73 (Samsung TCPG 6121P30A) ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 18 (level, low) -> IRQ 193 ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #1) tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) tveeprom 1-0050: Hauppauge model 23559, rev D596, serial# 8859942 tveeprom 1-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR remote ivtv1: This is the second unit of a PVR500 ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: Encoder revision: 0x02050032 ivtv1: Registered device video1 for encoder MPEG ivtv1: Registered device video33 for encoder YUV ivtv1: Registered device vbi1 for encoder VBI ivtv1: Registered device video25 for encoder PCM audio tuner 1-0061: type set to 73 (Samsung TCPG 6121P30A) ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 ivtv: ==================== END INIT IVTV ==================== And here's what I get with a reboot (radio etc doesn't register or work) : ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.8.0 (tagged release) loading ivtv: Linux version: 2.6.18-1.2200.fc5 mod_unload 686 REGPARM 4KSTACKS gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Unknown card: vendor/device: 4444/0016 ivtv0: subsystem vendor/device: 0070/f7f7 ivtv0: cx23416 based ivtv0: Defaulting to Hauppauge WinTV PVR-150 card ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) ivtv0: Prefix your subject line with [UNKNOWN CARD]. ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 17 (level, low) -> IRQ 169 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) tveeprom 0-0050: Hauppauge model 23559, rev D596, serial# 8859942 tveeprom 0-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73) tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 0-0050: audio processor is CX25843 (idx 37) tveeprom 0-0050: decoder processor is CX25843 (idx 30) tveeprom 0-0050: has radio, has no IR remote ivtv0: This is the second unit of a PVR500 ivtv0: Correcting tveeprom data: no radio present on second unit tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 0-0060: TEA5767 detected. tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0) tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio) tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Encoder revision: 0x02050032 ivtv0: Registered device video0 for encoder MPEG ivtv0: Registered device video32 for encoder YUV ivtv0: Registered device vbi0 for encoder VBI ivtv0: Registered device video24 for encoder PCM audio tuner 0-0061: type set to 73 (Samsung TCPG 6121P30A) ivtv0: Initialized WinTV PVR 500 (unit #2), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Unknown card: vendor/device: 4444/0016 ivtv1: subsystem vendor/device: 0070/f7f7 ivtv1: cx23416 based ivtv1: Defaulting to Hauppauge WinTV PVR-150 card ivtv1: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv1: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) ivtv1: Prefix your subject line with [UNKNOWN CARD]. ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 18 (level, low) -> IRQ 193 ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #1) tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) tveeprom 1-0050: Hauppauge model 23559, rev D596, serial# 8859942 tveeprom 1-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR remote ivtv1: This is the second unit of a PVR500 ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: Encoder revision: 0x02050032 ivtv1: Registered device video1 for encoder MPEG ivtv1: Registered device video33 for encoder YUV ivtv1: Registered device vbi1 for encoder VBI ivtv1: Registered device video25 for encoder PCM audio tuner 1-0061: type set to 73 (Samsung TCPG 6121P30A) ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
