ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.8.1 (v4l-dvb + ivtv virtual merge) Revision: 3587 loading ivtv: Linux version: 2.6.18 preempt mod_unload 386 gcc-4.0 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23415 based) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) tveeprom 1-0050: Hauppauge model 48134, rev J342, serial# 7066538 tveeprom 1-0050: tuner model is Temic 4009FR5 (idx 42, type 20) tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 1-0050: audio processor is MSP4418 (idx 25) tveeprom 1-0050: decoder processor is SAA7115 (idx 19) tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-350 msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0) msp3400 1-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect and autoselect ivtv0: Encoder revision: 0x02050032 ivtv0: Decoder revision: 0x02020023 ivtv0: Registered device video1 for encoder MPEG ivtv0: Registered device video32 for encoder YUV ivtv0: Registered device vbi1 for encoder VBI ivtv0: Registered device video24 for encoder PCM audio ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPEG ivtv0: Registered device vbi8 for decoder VBI ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 1-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5)) ivtv0: i2c addr 0x21 not found for command 0x4008646f! ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ==================== END INIT IVTV ==================== ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0) ivtv0-osd: screen coords: [0 0] -> [720 576] ivtv0-osd: original global alpha = 208 ivtv0-osd: current OSD state = 39 spurious 8259A interrupt: IRQ7. ivtv0-osd: new global alpha = 208 (1 255 0) ivtv0-osd: framebuffer at 0xf5510000, mapped to 0xd2010000, size 1665k ivtv0-osd: mode is 720x576x32, linelength=2880 ivtv0-osd: fb1: cx23415 TV out frame buffer device lirc_dev: IR Remote Control driver registered, at major 61 lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted. lirc_serial: auto-detected active low receiver lirc_dev: lirc_register_plugin: sample_rate: 0 ivtv0: i2c addr 0x21 not found for command 0xc0445624! ivtv0: i2c addr 0x21 not found for command 0xc0445624! ivtv0: i2c addr 0x21 not found for command 0xc0445624! ivtv0: i2c addr 0x21 not found for command 0xc0445624! ivtv0: i2c addr 0x21 not found for command 0xc0cc5605! ivtv0: i2c addr 0x21 not found for command 0xc0cc5605! ivtv0: i2c addr 0x21 not found for command 0xc0cc5605! ivtv0: i2c addr 0x21 not found for command 0xc0cc5605! ivtv0: i2c addr 0x21 not found for command 0xc0cc5605!
it works, if I manually load saa7115 and saa7127 before ivtv -- Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
