Is there still work in progress or should it work? This is the v4l-dvb hg from 
07.03.:

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 1.0.0 (2.6.20.1 preempt mod_unload 386 ) loading
ivtv0: Autodetected Hauppauge card (cx23415 based)
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02060039
ivtv0: Decoder revision: 0x02020023
tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
msp3400 0-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
msp3400 0-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and aut
oselect
tveeprom 0-0050: Hauppauge model 48139, rev K257, serial# 7521224
tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38)
tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x
74)
tveeprom 0-0050: audio processor is MSP4418 (idx 25)
tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-350
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPEG (1 MB)
ivtv0: Registered device vbi8 for decoder VBI (1 MB)
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV (1 MB)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv:  ====================  END INIT IVTV  ====================
ivtv_fb: disagrees about version of symbol ivtv_vapi_result
ivtv_fb: Unknown symbol ivtv_vapi_result
ivtv_fb: disagrees about version of symbol ivtv_udma_alloc
ivtv_fb: Unknown symbol ivtv_udma_alloc
ivtv_fb: disagrees about version of symbol ivtv_udma_unmap
ivtv_fb: Unknown symbol ivtv_udma_unmap
ivtv_fb: disagrees about version of symbol ivtv_vapi
ivtv_fb: Unknown symbol ivtv_vapi
ivtv_fb: disagrees about version of symbol ivtv_udma_prepare
ivtv_fb: Unknown symbol ivtv_udma_prepare
ivtv_fb: disagrees about version of symbol ivtv_cards
ivtv_fb: Unknown symbol ivtv_cards
ivtv_fb: disagrees about version of symbol ivtv_udma_setup
ivtv_fb: Unknown symbol ivtv_udma_setup
linvdr:~#

-- 
"Feel free" - 5 GB Mailbox, 50 FreeSMS/Monat ...
Jetzt GMX ProMail testen: www.gmx.net/de/go/mailfooter/promail-out

_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel

Reply via email to