Gregor Fuis wrote: > Hello, I have an Club 3d ZAP 1101 card, which is recognized as Yuan > PG600. It gives me a black picture on tuner input, so I think tuner is > not recognized. Tuner on this card is Philips ST. Does somebody know if > this card should work with ivtv drivers. > > Thanks > > [ 1303.596007] ivtv: ==================== START INIT IVTV > ==================== > [ 1303.596012] ivtv: version 0.10.2 (tagged release) loading > [ 1303.596014] ivtv: Linux version: 2.6.19.2-iskratel SMP mod_unload > 586 REGPARM > [ 1303.596017] ivtv: In case of problems please include the debug info > between > [ 1303.596018] ivtv: the START INIT IVTV and END INIT IVTV lines, along > with > [ 1303.596020] ivtv: any module options, when mailing the ivtv-users > mailinglist. > [ 1303.596773] ivtv0: Autodetected Yuan PG600, Diamond PVR-550 card > (cx23416 based) > [ 1303.596803] ACPI: PCI Interrupt 0000:01:06.0[A] -> GSI 17 (level, > low) -> IRQ 17 > [ 1304.296817] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > [ 1304.516341] ivtv0: Encoder revision: 0x02060039 > [ 1304.551837] cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > [ 1309.948567] cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > [ 1310.143017] ivtv0: Registered device video4 for encoder MPEG (2 MB) > [ 1310.143393] ivtv0: Disabled encoder YUV device > [ 1310.143396] ivtv0: Disabled encoder VBI device > [ 1310.143398] ivtv0: Disabled encoder PCM audio device > [ 1310.543099] ivtv0: Initialized Yuan PG600, Diamond PVR-550, card #0 > [ 1310.543402] ivtv: ====================== NEXT CARD > ====================== <snip>
I have a "ZAP-TV1001 MCE" with an xceive xc2028 tuner. No tuner detected at all for your card and that fits the xceive, which needs to be activated via gpio. Are you sure about your tuner being philips? Regards, Zoltan _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
