Hi,
I have the following card in my Ubuntu 7.10 machine. When I boot I get the following message [ 67.599939] ivtv: ==================== START INIT IVTV ==================== [ 67.599984] ivtv: version 1.0.0 (2.6.22-14-server SMP mod_unload ) loading [ 67.600118] ivtv0: Unknown card: vendor/device: 4444/0016 [ 67.600156] ivtv0: subsystem vendor/device: 1002/ffff [ 67.600194] ivtv0: cx23416 based [ 67.600230] ivtv0: Defaulting to Hauppauge WinTV PVR-150 card [ 67.600268] ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of [ 67.600317] ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) [ 67.600365] ivtv0: Prefix your subject line with [UNKNOWN CARD]. [ 67.600934] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 67.600980] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [ 67.601082] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 67.663287] input: PC Speaker as /class/input/input5 [ 68.284511] ivtv0: loaded v4l-cx2341x-enc.fw firmware (-139635921144336 bytes) [ 68.506035] ivtv0: Encoder revision: 0x02050032 [ 68.506072] ivtv0: Recommended firmware version is 0x02060039. [ 68.512276] tveeprom 2-0050: Huh, no eeprom present (err=-121)? [ 68.512315] tveeprom 2-0050: Encountered bad packet header [ad]. Corrupt or not a Hauppauge eeprom. [ 68.512364] ivtv0: Invalid EEPROM [ 68.585947] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! [ 68.586001] ivtv0: i2c addr 0x44 not found for command 0x4008646f! [ 68.586041] ivtv0: i2c hardware 0x00000020 (wm8775) not found for command 0x4008646d! [ 68.586089] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0x4008646d! [ 68.695757] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! [ 68.695807] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! [ 68.805612] ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! [ 68.805701] ivtv0: Registered device video0 for encoder MPEG (4 MB) [ 68.805911] ivtv0: Registered device video32 for encoder YUV (2 MB) [ 68.806126] ivtv0: Registered device vbi0 for encoder VBI (1 MB) [ 68.806236] ivtv0: Registered device video24 for encoder PCM audio (1 MB) [ 68.806463] ivtv0: Registered device radio0 for encoder radio [ 68.806516] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 [ 68.806568] ivtv: ==================== END INIT IVTV ==================== The details of the card is as follows: ATI E-Home Wonder (ATI eHome TV Wonder NTSC) 1002:ffff http://www.bttv-gallery.de/100_0482.JPG_ati_ehome_wonder_a.jpghttp://www.btt v-gallery.de/100_0485.JPG_ati_ehome_wonder_back_a.jpg chips:cx23416-12, ATI Theatre200 (on back) tuner: FM1236/W H-3 pcb: PN 109-99900-10 .vendor = 0x4444 .device = 0x0016 .subvendor = 0x1002 .subdevice = 0xffff found at 0000:01:0a.0, rev: 1, irq: 209, latency: 64, mmio: 0xdc000000 subsystem: 1002:ffff, board ... Regards, Darren --- Darren Benjamin Telephone: +1 (919) 431-0030 VP Operations - Americas Mobile: +1 (919) 412-8677 Nabla Communications Inc. Email: <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] The information in this email is confidential. The contents may not be disclosed or used by anyone other than the addressee. If you are not the intended recipient, please notify the sender immediately at the above address. The sender cannot accept any responsibility for the accuracy or completeness of this message as it has been transmitted over a public network. If you suspect that the message may have been intercepted or amended, please contact the sender.
<<attachment: image001.jpg>>
<<attachment: image002.jpg>>
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
