What am i missing or this card not supported ?

i thought i had found the solution here, but i think the article is outdated and no longer necessary with 2.6.22 kernel: http://mythtv.org/wiki/index.php/AVerMedia_M150-D

Thanks!
---
MythBuntu 7.10, Compaq P4 1.6Mhz P4
Linux jp4 2.6.22-14-generic #1 SMP Sun Oct 14 23:05:12 GMT 2007 i686 GNU/Linux
Card is listed here: http://www.bttv-gallery.de/ (AverMedia UltraTV 1500 MCE)

[   38.206472] ivtv:  ==================== START INIT IVTV ====================
[   38.206479] ivtv:  version 1.0.0 (2.6.22-14-generic SMP mod_unload 586 ) loading
[   38.206644] ivtv0: Unknown card: vendor/device: 4444/0016
[   38.206650] ivtv0:               subsystem vendor/device: 1461/c035
[   38.206654] ivtv0:               cx23416 based
[   38.206657] ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
[   38.206660] ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of
[   38.206664] ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)
[   38.206668] ivtv0: Prefix your subject line with [UNKNOWN CARD].
[   38.206734] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 21 (level, low) -> IRQ 21
[   38.407164] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[   38.411107] parport_pc 00:07: reported by Plug and Play ACPI
[   38.411174] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   38.901221] ivtv0: loaded v4l-cx2341x-enc.fw firmware (3709054608 bytes)
[   39.114828] ivtv0: Encoder revision: 0x02050032
[   39.114834] ivtv0: Recommended firmware version is 0x02060039.
[   39.132443] tveeprom 0-0050: Huh, no eeprom present (err=-121)?
[   39.132450] tveeprom 0-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
[   39.132455] ivtv0: Invalid EEPROM
[   39.169625] tuner 0-0060: TEA5767 detected.
[   39.169631] tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
[   39.169685] tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio)
[   39.169932] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[   39.215497] cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
[   42.703693] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[   42.884966] ivtv0: i2c hardware 0x00000020 (wm8775) not found for command 0x4008646d!
[   43.036097] tuner 0-0061: tuner type not set
[   43.156485] ivtv0: Registered device video0 for encoder MPEG (4 MB)
[   43.157055] ivtv0: Registered device video32 for encoder YUV (2 MB)
[   43.157622] ivtv0: Registered device vbi0 for encoder VBI (1 MB)
[   43.158015] ivtv0: Registered device video24 for encoder PCM audio (1 MB)
[   43.158669] ivtv0: Registered device radio0 for encoder radio
[   43.159915] tuner 0-0061: tuner type not set
[   43.182028] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
[   43.182247] ivtv:  ====================  END INIT IVTV  ====================
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel

Reply via email to