Hi Andy, I'm in the process of packing up and moving house at the moment, should be resettled some time at the beginning of July.
Unfortunately, my test units are going to be packed away soon. I am moving from a non-ATSC area in to an ATSC available area. I was wondering if you might be able to provide a summary of the current ATSC support in the chip. A few questions about it. -Is the configuration process as simple as scanning for channels and then selecting one via a v4l-ctl (if working from the command line)? -Is the simultaneous capture from the analog input and the ATSC input working in a stable fashion? -What is the highest bitrate you have seen on the ATSC input? -Are you aware of any problems with 2 x analog + 2 x ATSC capture on the same PCI bus? -Any antennas you have had particularly good luck with (or anyone else who wants to chime in)? -Is there any support for breaking out guide data that may be in the ATSC TS? -Any other things a new user might benefit from? Thanks again for all your work on the driver. We have a patch we hope to give you soon around the volume level calculations for the RF input, we think we found a math bug there. Also, we're still searching for an indication in the docs that the audio path on the SA input should be able to be volume controlled. Thinking it through it seems like it would be but we've seen no sign of it so far. Perhaps it is meant to be line level locked? -Jeff
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
