On Sun, 2010-09-26 at 20:12 -0300, Fábio JANISZEVSKI wrote:
> card:
> Product Name: PixelView Play TV Cinema Pro (Hardware Mpeg2)
> Conexant MPEG II encoder CX23416
> http://www.prolink-usa.com/item_disp.php?upc=4712470170881
>
> ##########################################################
>
> r...@mediapc:/home/sammy# dmesg
> ...
> [ 8.107681] ivtv: Start initialization, version 1.4.1
> [ 8.107740] ivtv0: Initializing card 0
> [ 8.107744] ivtv0: Unknown card: vendor/device: [4444:0016]
> [ 8.107798] ivtv0: subsystem vendor/device:
> [1554:4967]
> [ 8.107850] ivtv0: cx23416 based
Fabio,
I have a patch for you to try here:
http://linuxtv.org/hg/~awalls/new-cards/raw-rev/ead3c0ca29e5
You will need to extract a firmware image from a Windows driver for the
XC2028 tuner chip. Instructions are here:
http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028#Firmware_Information
The script to extract the firmware is here:
http://linuxtv.org/hg/v4l-dvb/raw-file/1da5fed5c8b2/linux/Documentation/video4linux/extract_xc3028.pl
TV from the RF tuner will not work reliably unless you find the proper
GPIO pin to reset the XCeive tuner. I guessed:
.xceive_pin = 1
which may not be correct.
I also guessed at the other GPIO settings for audio, so they may not be
correct either.
Good Luck.
Regards,
Andy
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
