Okay cool. I got the firmware off of the CD. I had to do the hack
pointed out by jimmyfergus to get it to work.
I'm still having trouble with the following:
ivtv: Unknown card: vendor/device: 4444/0016, subsystem
vendor/device: 0070/8003
ivtv: Defaulting to WinTV PVR 250 card
And later:
ivtv: Encoder revision: 0x02050032
ivtv: Encoder Firmware is buggy, use version 0x02040011
And finally, I'm getting all of this stuff at the bottom after I tried
to capture:
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x21 not found!
ivtv: i2c client addr: 0x21 not found!
ivtv: Setting audio matrix to input 1, output 1
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x21 not found!
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x21 not found!
ivtv: i2c client addr: 0x21 not found!
ivtv: i2c client addr: 0x21 not found!
ivtv: ENC: User stopped capture.
ivtv: i2c client addr: 0x21 not found!
ivtv: i2c client addr: 0x21 not found!
ivtv: i2c client addr: 0x21 not found!
ivtv: ENC: User stopped capture.
ivtv: i2c client addr: 0x21 not found!
ivtv: i2c client addr: 0x21 not found!
ivtv: i2c client addr: 0x21 not found!
When I try to capture something, I just get a blank file.
On Mon, 2004-12-27 at 16:21, kevin thayer wrote:
> it uses the same firmware as any of the pvr cards.
>
> There's a wiki page about firmware and how to extract
> it
>
> -tmk
>
> --- "Gregory J. Haase" <[EMAIL PROTECTED]>
> wrote:
>
> > I'm trying to get a PVR150 working. I've been
> > following the list for
> > about a month now, and looked through all the
> > archives back to October
> > when work on the 150 just started.
> >
> > I downloaded ivtv-0.3.2a from Chris Kennedy's site,
> > and I'm trying to
> > follow the instructions on
> >
> http://www.byopvr.com/Sections+index-req-viewarticle-artid-6-page-2.html
> >
> > I'm getting hung up on the part where it says to
> > extract the firmware
> > for the card. When I run #./ivtvfwextract.pl
> > pvr150_22_22292.exe I get
> > the following error message: "./ivtvfwextract.pl:
> > Can't open
> > /tmp/ivtvex.4413/hcwpvrp2.sys: No such file or
> > directory"
> >
> > I proceeded with compiling everything anyway, to see
> > what would happen.
> > It says I have an unknown card, and then defaults to
> > the 250. The box
> > says it's a WinTV-PVR-150 model 1045. Output of
> > #dmesg | grep ivtv:
> >
> > ivtv: ==================== START INIT IVTV
> > ====================
> > ivtv: version 0.2.0 (rc3b) loading
> > ivtv: Linux version: 2.6.9-1.6_FC2 686 REGPARM
> > 4KSTACKS gcc-3.3
> > ivtv: In case of problems please include the debug
> > info
> > ivtv: between the START INIT IVTV and END INIT IVTV
> > lines when
> > ivtv: mailing the ivtv-devel mailinglist.
> > ivtv: Unknown card: vendor/device: 4444/0016,
> > subsystem vendor/device:
> > 0070/8003
> > ivtv: Defaulting to WinTV PVR 250 card
> > ivtv: Please mail the vendor/device and subsystem
> > vendor/device IDs and
> > what kind of
> > ivtv: card you have to the ivtv-devel mailinglist:
> > http://sourceforge.net/projects/ivtv
> > ivtv: Prefix your subject line with [UNKNOWN CARD].
> > ivtv: Found an iTVC16 based chip
> > ivtv: XXX PCI device: 0x0735 vendor: 0x1039
> > ivtv: i2c attach [client=tveeprom[0],ok]
> > ivtv: Tuner Type 50, Tuner formats 0x00001000,
> > Radio: yes, Model
> > 0x008d1615, Revision 0x00000000
> > ivtv: NTSC tuner detected
> > ivtv: Radio detected
> > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c
> > driver #0
> > ivtv: i2c attach [client=(tuner unset),ok]
> > saa7115: starting probe for adapter ivtv i2c driver
> > #0 (0x10005)
> > Unable to open '/lib/modules/ivtv-fw-enc.bin'.
> > ivtv: failed loading encoder firmware
> > ivtv: Error loading firmware -3!
> > ivtv: Error -3 initializing firmware.
> > ivtv: Error -12 on initialization
> > ivtv-iTVC15_16_mpg2_encoder_card: probe of
> > 0000:00:09.0 failed with
> > error -12
> > ivtv: ==================== END INIT IVTV
> > ====================
> >
> > I realize at this point that the 150 isn't
> > completely supported yet, and
> > that at this point in my installation there are
> > probably several things
> > gone horribly wrong, but if someone would be so kind
> > as to point me in
> > any direction possible, I'd appreciate it.
> >
> > Greg Haase
> >
> >
> >
> >
> -------------------------------------------------------
> > SF email is sponsored by - The IT Product Guide
> > Read honest & candid reviews on hundreds of IT
> > Products from real users.
> > Discover which products truly live up to the hype.
> > Start reading now.
> > http://productguide.itmanagersjournal.com/
> > _______________________________________________
> > ivtv-devel mailing list
> > [email protected]
> >
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
> >
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
