OK. First, let me lead with many thanks to the whole IvyTV team, and especially Chris.
I've screwed something up. I've had a nice, stable system dating back over a year, and just this Christmas, my wife decided it was time to add a second tuner to our system. The system is a NForce2-based box, with a year old PVR-350 and a brand-new PVR-250. It's running Gentoo. With the new tuner, I decided to update the box, and so I changed from my trust 2.4 kernel to a brand new 2.6 kernel. And upgraded ivtv to 0.2.0. And, you know what? It all worked with the original 350 card, but I was getting static on the 250. Checked through the archives, discovered that the new 250, with a type 50 tuner needed updated v4l tuner.o. Fair enough. Tried to install the v4l snapshot (patching didn't work on my gentoo-dev-sources kernel). All hell broke loose after that, and now I can't even get anything off my old 350. I'm quite frustrated right now, and the wife is unhappy too. Any help you can give will be greatly appreciated. I've looked at the archives and seen a similar problem, but no resolution. My next steps are to move to a bleeding kernel that has the v4l patches, and also to move to the 0.3.0 ivtv driver set ... but it's a sign of desperation! Details from dmesg: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.2.0 (rc3) loading ivtv: Linux version: 2.6.9-gentoo-r13 preempt K7 4KSTACKS gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x01e0 vendor: 0x10de ivtv: i2c client addr: 0x50 not found! ivtv: Error -19 reading Hauppauge eeprom. ivtv: Possible causes: the tveeprom module was not loaded, or ivtv: the eeprom kernel module was loaded before the tveeprom module. tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[0],ok] saa7115: status: (1E) 0x48, (1F) 0xc0 saa7127: video encoder driver version V 0.3 loaded saa7127: Selecting NTSC video Standard saa7127: Selecting S-Video+Composite saa7127: Turn WSS off saa7127: Widescreen Mode 4:3 Full Format saa7127: Selecting Normal Encoder Input saa7127: Enable Video Output ivtv: i2c attach [client=saa7127[0],ok] msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio mode=simple msp3410: daemon started ivtv: i2c attach [client=MSP3448W-A2,ok] ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware is buggy, use version 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 350 card with 9 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 using 8 131072 byte buffers 1048576 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total ivtv: Registered v4l2 device, streamtype 5 minor 16 ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total ivtv: Registered v4l2 device, streamtype 6 minor 228 ivtv: Create stream 7 ivtv: Registered v4l2 device, streamtype 7 minor 232 ivtv: Create DMA stream 8 using 16 65536 byte buffers 1048576 kbytes total ivtv: Registered v4l2 device, streamtype 8 minor 48 ivtv: Could not detect tuner standard, defaulting to NTSC. tuner: tuner type not set ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. tuner: tuner type not set saa7115: decoder set norm NTSC ivtv: ivtv_enc_thread: pid = 5743, itv = 0xe093cd60 ivtv: ivtv_dec_thread: pid = 5744, itv = 0xe093cd60 saa7115: set audio: 0x01 saa7127: Setting Encoder Video Standard saa7127: Set NTSC Video Mode saa7127: Selecting NTSC video Standard ivtv: Initialized WinTV PVR 350, card #0 ivtv: Autodetected WinTV PVR 250 card ivtv: Found an iTVC16 based chip ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x01e0 vendor: 0x10de tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values spurious 8259A interrupt: IRQ7. ivtv: i2c attach [client=saa7115[1],ok] saa7115: status: (1E) 0x48, (1F) 0xc0 msp34xx: init: chip=MSP3445G-B8 +nicam +simple +simpler +radio mode=simple msp3410: daemon started ivtv: i2c attach [client=MSP3445G-B8,ok] ivtv: i2c client addr: 0x50 not found! ivtv: Error -19 reading Hauppauge eeprom. ivtv: Possible causes: the tveeprom module was not loaded, or ivtv: the eeprom kernel module was loaded before the tveeprom module. ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware is buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 250 card with 4 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 1 ivtv: Create DMA stream 1 using 8 131072 byte buffers 1048576 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 33 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 225 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 25 ivtv: Could not detect tuner standard, defaulting to NTSC. tuner: tuner type not set ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. tuner: tuner type not set saa7115: decoder set norm NTSC ivtv: ivtv_enc_thread: pid = 5837, itv = 0xe095102c saa7115: set audio: 0x01 ivtv: Initialized WinTV PVR 250, card #1 ivtv: ==================== END INIT IVTV ==================== Thanks, Anthony ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
