Okay, thanks. So for the PVR-150 we need the cx25840 code working and can ignore the references to replacing the kernel's msp3400 module, etc?
----- Original Message ----- From: "Thomas M. Pluth" <[EMAIL PROTECTED]> To: [email protected] Subject: RE: [ivtv-devel] pvr-150 video, no audio or remote Date: Sat, 1 Jan 2005 17:11:56 -0800 > > The reason you don't see msp3400 or saa7115 is that those two chips have > been replaced by a single Conexant CX25840 Broadcast Audio/Video decoder > chip. That is what has helped to make the PVR-150 a less expensive card. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Jim Hammack > Sent: Saturday, January 01, 2005 2:59 PM > To: [email protected] > Subject: Re: [ivtv-devel] pvr-150 video, no audio or remote > > for what it's worth, i'm not seeing Jarod's problem with "tuner=50." I have > a PVR-150 and get great tuner video, but no audio. Composite video is > great, but S-video gives me only a grey screen with no indication of any > signal (black when there's no input.) > > Regarding audio, I'm curious as to why msp3400 and saa7115 don't show up in > my lsmod? > > Jim > modules.conf: > > # WinTV PVR-150 > alias char-major-81 videodev > alias char-major-81-0 ivtv > add below ivtv msp3400 saa7115 tuner > # end > > dmesg: > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.3.2 (a) loading > ivtv: Linux version: 2.6.10 K7 gcc-3.3 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ivtv: VIA PCI device: 0x3099 vendor: 0x1106 > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > cx25840: Ignoring new-style parameters in presence of obsolete ones > cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) > cx25840: detecting client on address 0x88 > cx25840: writing init values > ivtv: i2c attach [client=cx25840[0],ok] > cx25840: status: (0x40C) 0x00 (0x40D) 0x81, (0x40E) 0x35 > wm8775: Ignoring new-style parameters in presence of obsolete ones > wm8775: starting probe for adapter ivtv i2c driver #0 (0x10005) > wm8775: detecting client on address 0x36 > wm8775: writing init values > ivtv: i2c attach [client=wm8775[0],ok] > ivtv: Encoder revision: 0x02050032 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 4 streams > ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total > ivtv: Registered v4l2 device, streamtype 0 minor 0 > ivtv: Create DMA stream 1 > ivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 224 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Could not detect tuner standard, defaulting to NTSC. > tuner: tuner type not set > cx25840: decoder set input (6) > cx25840: now setting Composite input > ivtv: Switching standard to NTSC. > tuner: tuner type not set > cx25840: decoder set norm NTSC > cx25840: set audio: 0x01 > ivtv: Initialized WinTV PVR 150, card #0 > ivtv: ==================== END INIT IVTV ==================== > > lsmod: > > bash-2.05b# lsmod > Module Size Used by > wm8775 5080 0 > cx25840 27352 0 > tuner 20516 0 > ivtv 811268 0 > snd_pcm_oss 47908 0 > snd_mixer_oss 17344 1 snd_pcm_oss > ipv6 213632 10 > natsemi 23456 0 > snd_pcm 79496 1 snd_pcm_oss > snd_timer 20036 1 snd_pcm > snd_page_alloc 7492 1 snd_pcm > snd 43620 4 snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer > > > > ----- Original Message ----- > From: "Jarod Wilson" <[EMAIL PROTECTED]> > To: [email protected] > Subject: Re: [ivtv-devel] pvr-150 video, no audio or remote > Date: Thu, 30 Dec 2004 15:18:27 -0800 > > > > > On Thursday 30 December 2004 12:10, Robert Brewer wrote: > > > tuner type 50 does work for me, but I have to explicitly: > > > modprobe tuner type=50 > > > modprobe ivtv > > > for it to work. For some reason > > > modprobe ivtv > > > by itself with options ivtv tuner=50 in my /etc/modules.conf isn't > working. > > > > That's odd... > > > > > I have captured live TV video with it. But I'm willing to wait for > > > the video and audio to work, in the meantime it would be really nice > > > to have the remote working so I could listen to my music in mythmusic > > > more easily. > > > > Ah, I thought you said you'd only captured static, which assuming you had > a > > valid source connected, would mean the tuner likely wasn't set correctly. > > > > Right now, I'd just like to be able to load the driver without my machine > > kp'ing. :-) > > > > -- > > Jarod C. Wilson, RHCE > > [EMAIL PROTECTED] > << 2.dat >> > > > > Jim Hammack > [EMAIL PROTECTED] > > > > ------------------------------------------------------- > The SF.Net email is sponsored by: Beat the post-holiday blues > Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. > It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > > > ------------------------------------------------------- > The SF.Net email is sponsored by: Beat the post-holiday blues > Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. > It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel Jim Hammack [EMAIL PROTECTED] ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
