On 1/10/2005 5:49 AM, Gerd Knorr wrote:
David George <[EMAIL PROTECTED]> writes:
FYI, There was a last minute commit to 2.6.10 to change the default
msp3400 mode because it was causing some problems with certain bttv
cards. Basically with ivtv the default mode is simpler, in 2.6.10 the
default mode was changed back to the bttv default of simple. So if
the 2.6.10 msp3400 doesn't work try options simpler=1 for the msp3400
module.
No, the insmod option is "opmode":
0 == manual
1 == simple
2 == simpler (i.e. ivtv).
At the moment the driver picks either 0 or 1 depending on the hardware
capabilities unless you overwrite that with the opmode insmod option.
opmode=1 might work with ivtv as well, any reports on this are
welcome. opmode=2 broke Hauppauge bttv cards for not-yet known
reasons.
That'll teach me for trusting my memory ;-) The option used to be
called simpler in the ivtv version. Sorry for spreading incorrect
information.
--
David
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
