Sounds like it's pretty close. In order to get the gpio settings, your best bets are to:
A) set up an i2c sniffer and capture the various initializations of the gpio chip (running windows) B) ask adaptec for specs (works best if you call them) if you can provide i2c dumps, we can probably figure out how to get your card supported. -tmk --- Martin Vaughan <[EMAIL PROTECTED]> wrote: > Anyone had any success with these cards?, I am > testing the AVC-2010 (no tuner, just S-VIDEO, > Composite and stereo RCA), this card is based of the > CX23416 - No MSP Audio IC. > > I get excellent video but the sound seems very > distorted and severely out of sync, if I set audio > to 44.1 khz using audio bitmask then sound is in > sync but still sounds deep and lacks high end, as if > the sound waveform has been chopped. > > it would appear that setting the audio bitmask for > 44.1 khz is changing nothing on the card just what > V4L assumes the cards output stream is, and I assume > that the card is defaulting to 44.1 khz upon loading > the firmware. I am guessing for the audio to be > correct, the card needs to be initialised further - > but I have no way of knowing how the M$ Windows > Driver initialises the card. > > I also tried Takeru Komoriya's GPIO hacking but with > the cards own fimware got different results each > time I read 9020 GPIO direction bit, each time I > read it toggled from 0000 to 0001 - nothing like > 3080 as expected with Takeru hack. In anycase I > don't have a clue what the GPIO direction setting > does. > > I am using the firmware from the Adatec CD > *willo.sys. > > I might just buy a PVR250 card but it is a shame to > not use the adaptec one since it is almost there. it > would be great to add this to the list. Also I > already spent a lot of time messing and it would be > great to see it work. > > I am using Chris Kennedy's ivtv 0.2.0 rc3d version > > Any advice or help would be great. > > > ------------------------------------------------------- > The SF.Net email is sponsored by: Beat the > post-holiday blues > Get a FREE limited edition SourceForge.net t-shirt > from ThinkGeek. > It's fun and FREE -- well, > almost....http://www.thinkgeek.com/sfshirt > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
