Hey guys, I ran this across the user forums a few times but had no luck so I
thought I would try here. I have tried the ivtv 0.2.x and 0.3.x series
drivers with the stock fedora core 2, 2.6.8 & .9 kernels, as well as a
vanilla 2.6.10 kernel. In every case the input and tv watching on the
monitor is perfect, but when I try and do tv out through the 350 card I
always get inverted colors, aka red=blue and vice versa. I have tried
several different versions of the firmware, all with the same result. I
tested the card+tvout under winxp, and it worked fine. Messing with the hue
helped a bit, but it still was not correct. I have tried all the various
tuner configs on the forums, and correctly it seems passing anything in the
modprobe options has no effect. Basically I am running out of ideas here. I
have attached the init code for the driver. My current setup is FC2, 2.6.10
kernel, vtv-0.2.0-rc3b. Also, the test_image option results in a prefect
test image. The card is a month old 350. 

Thanks!
Mark
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc3b) loading
ivtv: Linux version: 2.6.9-1.6_FC2 686 REGPARM 4KSTACKS gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
PCI: Found IRQ 10 for device 0000:00:0b.0
ivtv: Unreasonably low latency timer, setting to 64 (was 0)
ivtv: XXX PCI device: 0x7190 vendor: 0x8086
tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 2866878
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3440 (type = 11)
ivtv: i2c attach [client=tveeprom[0],ok]
ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00ad2598, Rev
ision 0x00000001
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
saa7115: status: (1E) 0x48, (1F) 0xc0
saa7127: video encoder driver version V 0.3 loaded
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[0],ok]
msp34xx: ivtv version
msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G)
 no-thread mode
msp34xx: $Id$ compiled on: Dec 19 2004 16:40:09
ivtv: i2c attach [client=MSP3448W-A2,ok]
tda9887: Ignoring new-style parameters in presence of obsolete ones
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach [client=tda9887,ok]
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware is buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 9 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers  4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create DMA stream 5 using 16 65536 byte buffers  1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create stream 6 using 1024 2048 byte buffers  262144 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create DMA stream 8
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Setting Tuner 47
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
ivtv: ivtv_enc_thread: pid = 1447, itv = 0x1acb4220
ivtv: ivtv_dec_thread: pid = 1448, itv = 0x1acb4220
spurious 8259A interrupt: IRQ7.
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set NTSC Video Mode
saa7127: Selecting NTSC video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ====================  END INIT IVTV  ====================

Reply via email to