send this output: rmmod tveeprom modprobe tveeprom dmesg | tail -n 16
-tmk --- Christopher Arnold <[EMAIL PROTECTED]> wrote: > > > On Thu, 20 Jan 2005, kevin thayer wrote: > > > update to the latest rc candidate. > > > > i think we're on rc3d. > > > Sorry for that. I have tried so many combinations > back and forward so i > lost where i where... > > Now im back at: > version: 0.2.0-62_rc3d.rhfc2.at > vermagic: 2.6.10-1.9_FC2 686 REGPARM 4KSTACKS > gcc-3.3 > > > if you're still having problems, post the output > from > > tveeprom and we'll try to help > > > Wich output from tveeprom? As seen in the output > from ivtv seen below i > get: > ivtv: i2c client addr: 0x50 not found! > ivtv: Error -19 reading Hauppauge eeprom. > > And yes the tveeprom module is loaded. > > #lsmod|grep eep > tveeprom 11032 0 > i2c_core 21057 6 > msp3400,saa7127,saa7115,tuner,tveeprom,i2c_algo_bit > > Anyone who have some more clues? Or am i missing > something? > > /Chris > > > > Jan 20 21:43:28 tv kernel: ivtv: > ==================== START INIT IVTV > ==================== > Jan 20 21:43:28 tv kernel: ivtv: version 0.2.0 > (rc3b) loading > Jan 20 21:43:28 tv kernel: ivtv: Linux version: > 2.6.10-1.9_FC2 686 REGPARM > 4KSTACKS gcc-3.3 > Jan 20 21:43:28 tv kernel: ivtv: In case of problems > please include the > debug info > Jan 20 21:43:28 tv kernel: ivtv: between the START > INIT IVTV and END INIT > IVTV lines when > Jan 20 21:43:28 tv kernel: ivtv: mailing the > ivtv-devel mailinglist. > Jan 20 21:43:28 tv kernel: ivtv: Autodetected WinTV > PVR 350 card > Jan 20 21:43:28 tv kernel: ivtv: Found an iTVC15 > based chip > Jan 20 21:43:28 tv kernel: ACPI: PCI interrupt > 0000:00:0a.0[A] -> GSI 10 > (level, low) -> IRQ 10 > Jan 20 21:43:28 tv kernel: ivtv: VIA PCI device: > 0x0258 vendor: 0x1106 > Jan 20 21:43:28 tv kernel: tuner: chip found at addr > 0xc2 i2c-bus ivtv i2c > driver #0 > Jan 20 21:43:28 tv kernel: ivtv: i2c attach > [client=(tuner unset),ok] > Jan 20 21:43:28 tv kernel: saa7115: starting probe > for adapter ivtv i2c > driver #0 (0x10005) > Jan 20 21:43:28 tv kernel: saa7115: detecting > saa7115 client on address > 0x42 > Jan 20 21:43:29 tv kernel: saa7115: writing init > values > Jan 20 21:43:29 tv kernel: ivtv: i2c attach > [client=saa7115[1],ok] > Jan 20 21:43:29 tv kernel: saa7115: status: (1E) > 0x40, (1F) 0xc0 > Jan 20 21:43:29 tv kernel: saa7127: Selecting NTSC > video Standard > Jan 20 21:43:29 tv kernel: saa7127: Selecting > S-Video+Composite > Jan 20 21:43:29 tv kernel: saa7127: Turn WSS off > Jan 20 21:43:29 tv kernel: saa7127: Widescreen Mode > 4:3 Full Format > Jan 20 21:43:29 tv kernel: saa7127: Selecting Normal > Encoder Input > Jan 20 21:43:29 tv kernel: saa7127: Enable Video > Output > Jan 20 21:43:29 tv kernel: ivtv: i2c attach > [client=saa7127[1],ok] > Jan 20 21:43:29 tv kernel: msp34xx: init: > chip=MSP3418W-B3 +nicam +simple > +simpler +radio mode=simple > Jan 20 21:43:29 tv kernel: ivtv: i2c attach > [client=MSP3418W-B3,ok] > Jan 20 21:43:29 tv kernel: msp3410: daemon started > Jan 20 21:43:29 tv kernel: ivtv: i2c client addr: > 0x50 not found! > Jan 20 21:43:29 tv kernel: ivtv: Error -19 reading > Hauppauge eeprom. > Jan 20 21:43:29 tv kernel: ivtv: Possible causes: > the tveeprom module was > not loaded, or > Jan 20 21:43:29 tv kernel: ivtv: the eeprom kernel > module was loaded > before the tveeprom module. > Jan 20 21:43:29 tv kernel: ivtv: Encoder revision: > 0x02040024 > Jan 20 21:43:29 tv kernel: ivtv: Encoder Firmware is > buggy, use version > 0x02040011 > Jan 20 21:43:29 tv kernel: ivtv: Decoder revision: > 0x02020023 > Jan 20 21:43:29 tv kernel: ivtv: Configuring WinTV > PVR 350 card with 9 > streams > Jan 20 21:43:29 tv kernel: ivtv: Create DMA stream 0 > using 256 16384 byte > buffers 4194304 kbytes total > Jan 20 21:43:29 tv kernel: ivtv: Registered v4l2 > device, streamtype 0 > minor 0 > Jan 20 21:43:29 tv kernel: ivtv: Create DMA stream 1 > Jan 20 21:43:29 tv kernel: ivtv: Registered v4l2 > device, streamtype 1 > minor 32 > Jan 20 21:43:29 tv kernel: ivtv: Create stream 2 > using 40 52224 byte > buffers 2097152 kbytes total > Jan 20 21:43:29 tv kernel: ivtv: Registered v4l2 > device, streamtype 2 > minor 224 > Jan 20 21:43:29 tv kernel: ivtv: Create DMA stream 3 > using 455 4608 byte > buffers 2097152 kbytes total > Jan 20 21:43:29 tv kernel: ivtv: Registered v4l2 > device, streamtype 3 > minor 24 > Jan 20 21:43:29 tv kernel: ivtv: Create stream 4 > Jan 20 21:43:30 tv kernel: ivtv: Registered v4l2 > device, streamtype 4 > minor 64 > Jan 20 21:43:30 tv kernel: ivtv: Create DMA stream 5 > using 16 65536 byte > buffers 1048576 kbytes total > Jan 20 21:43:30 tv kernel: ivtv: Registered v4l2 > device, streamtype 5 > minor 16 > Jan 20 21:43:30 tv kernel: ivtv: Create stream 6 > using 1024 2048 byte > buffers 262144 kbytes total > Jan 20 21:43:30 tv kernel: ivtv: Registered v4l2 > device, streamtype 6 > minor 228 > Jan 20 21:43:30 tv kernel: ivtv: Create stream 7 > Jan 20 21:43:30 tv kernel: ivtv: Registered v4l2 > device, streamtype 7 > minor 232 > Jan 20 21:43:30 tv kernel: ivtv: Create DMA stream 8 > Jan 20 21:43:30 tv kernel: ivtv: Registered v4l2 > device, streamtype 8 > minor 48 > Jan 20 21:43:30 tv kernel: ivtv: Could not detect > tuner standard, > defaulting to NTSC. > Jan 20 21:43:30 tv kernel: tuner: tuner type not set > Jan 20 21:43:30 tv kernel: ivtv: Setting audio > matrix to input 3, output 1 > Jan 20 21:43:30 tv kernel: ivtv: Switching standard > to NTSC. > Jan 20 21:43:30 tv kernel: tuner: tuner type not set > Jan 20 21:43:30 tv kernel: saa7115: decoder set norm > NTSC > Jan 20 21:43:30 tv kernel: saa7115: set audio: 0x01 > Jan 20 21:43:30 tv kernel: saa7127: Setting Encoder > Video Standard > Jan 20 21:43:30 tv kernel: saa7127: Set NTSC Video > Mode > Jan 20 21:43:30 tv kernel: saa7127: Selecting NTSC > video Standard > Jan 20 21:43:30 tv kernel: ivtv: ivtv_enc_thread: > pid = 4002, itv = > 0xe0b3a1a0 > Jan 20 21:43:30 tv kernel: ivtv: ivtv_dec_thread: > pid = 4003, itv = > 0xe0b3a1a0 > Jan 20 21:43:30 tv kernel: ivtv: Initialized WinTV > PVR 350, card #0 > Jan 20 21:43:30 tv kernel: ivtv: > ==================== END INIT IVTV > ==================== > > > > ------------------------------------------------------- > === message truncated === ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
