I've had my 250 working once before(well, sound wasn't working, but at least i could change channels). Here's the output of the ivtv driver when it was working:
Jan 5 20:05:49 myth kernel: ivtv: ==================== START INIT IVTV ==================== Jan 5 20:05:49 myth kernel: ivtv: version 0.1.10 (0.1.10-48.3_pre2_ck100zz.rhfc3.at) loading Jan 5 20:05:49 myth kernel: ivtv: Linux version: 2.6.9-1.681_FC3 686 REGPARM 4KSTACKS gcc-3.4 Jan 5 20:05:49 myth kernel: ivtv: In case of problems please include the debug info Jan 5 20:05:49 myth kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Jan 5 20:05:49 myth kernel: ivtv: mailing the ivtv-devel mailinglist. Jan 5 20:05:49 myth kernel: ivtv: Autodetected WinTV PVR 250 card Jan 5 20:05:49 myth kernel: ivtv: Found an iTVC16 based chip Jan 5 20:05:49 myth kernel: ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5 Jan 5 20:05:49 myth kernel: ivtv: pci: VIA detected device: 0x3099 vendor: 0x1106 Jan 5 20:05:49 myth kernel: tveeprom: Ignoring new-style parameters in presence of obsolete ones Jan 5 20:05:49 myth kernel: tveeprom: Hauppauge: model = 32552, rev = C168, serial# = 7356678 Jan 5 20:05:49 myth kernel: tveeprom: tuner = LG NTSC (TAPE series) (idx = 68, type = 47) Jan 5 20:05:49 myth kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) Jan 5 20:05:50 myth kernel: tveeprom: audio_processor = MSP3440 (type = 11) Jan 5 20:05:50 myth kernel: ivtv: i2c attach [client=tveeprom[0],ok] Jan 5 20:05:50 myth kernel: ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x008d1598, Revision 0x00000001 Jan 5 20:05:50 myth kernel: ivtv: NTSC tuner detected Jan 5 20:05:50 myth kernel: ivtv: Radio detected Jan 5 20:05:50 myth kernel: tuner: Ignoring new-style parameters in presence of obsolete ones Jan 5 20:05:50 myth kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Jan 5 20:05:50 myth kernel: ivtv: i2c attach [client=(tuner unset),ok] Jan 5 20:05:50 myth kernel: saa7115: Ignoring new-style parameters in presence of obsolete ones Jan 5 20:05:50 myth kernel: saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) Jan 5 20:05:50 myth kernel: saa7115: detecting saa7115 client on address 0x42 Jan 5 20:05:50 myth kernel: saa7115: writing init values Jan 5 20:05:50 myth kernel: ivtv: i2c attach [client=saa7115[0],ok] Jan 5 20:05:50 myth kernel: saa7115: status: (1E) 0x50, (1F) 0xc0 Jan 5 20:05:50 myth kernel: msp3400: Ignoring new-style parameters in presence of obsolete ones Jan 5 20:05:50 myth kernel: msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio mode=simpler Jan 5 20:05:50 myth kernel: ivtv: i2c attach [client=MSP3448W-A2,ok] Jan 5 20:05:51 myth kernel: ivtv: Encoder revision: 0x02040024 Jan 5 20:05:51 myth kernel: ivtv: Configuring WinTV PVR 250 card with 5 streams Jan 5 20:05:51 myth kernel: ivtv: Create DMA stream 0 using 128 buffers of size 32768 Jan 5 20:05:51 myth kernel: ivtv: Create DMA stream 1 using 128 buffers of size 32768 Jan 5 20:05:51 myth kernel: ivtv: Create stream 2 using 128 buffers of size 52224 Jan 5 20:05:51 myth kernel: ivtv: Create DMA stream 3 using 128 buffers of size 32768 Jan 5 20:05:51 myth kernel: ivtv: Create stream 4 Jan 5 20:05:51 myth kernel: ivtv: Setting Tuner 47 Jan 5 20:05:51 myth kernel: tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 Jan 5 20:05:51 myth kernel: ivtv: Setting audio matrix to input 3, output 1 Jan 5 20:05:51 myth kernel: ivtv: Switching standard to NTSC. Jan 5 20:05:52 myth kernel: saa7115: decoder set norm NTSC Jan 5 20:05:52 myth kernel: saa7115: set audio: 0x01 Jan 5 20:05:52 myth kernel: ivtv: Initialized WinTV PVR 250, card #0 Jan 5 20:05:52 myth kernel: ivtv: ==================== END INIT IVTV ==================== And now here's the output when it's not working: I don't know why the tuner is no longer being detected. I've upgraded the kernel and driver. I'm really at a loss. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.1.10 (0.1.10-49_pre2_ck100zz.rhfc3.at) loading ivtv: Linux version: 2.6.10-1.737_FC3 686 REGPARM 4KSTACKS gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 250 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5 ivtv: pci: VIA detected device: 0x3099 vendor: 0x1106 ivtv: i2c client addr: 0x50 not found! ivtv: Error -19 reading Hauppauge eeprom. ivtv: Possible causes: the tveeprom module was not loaded, or ivtv: the eeprom kernel module was loaded before the tveeprom module. tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: Ignoring new-style parameters in presence of obsolete ones saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[0],ok] saa7115: status: (1E) 0x48, (1F) 0xc0 msp3400: Unknown parameter `simple' msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio mode=simple ivtv: i2c attach [client=MSP3448W-A2,ok] msp3410: daemon started ivtv: Encoder revision: 0x02040024 ivtv: Configuring WinTV PVR 250 card with 4 streams ivtv: Create DMA stream 0 using 128 buffers of size 32768 ivtv: Create DMA stream 1 using 128 buffers of size 32768 ivtv: Create stream 2 using 128 buffers of size 52224 ivtv: Create DMA stream 3 using 128 buffers of size 32768 ivtv: Could not detect tuner standard, defaulting to NTSC. ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. tuner: tuner type not set saa7115: decoder set norm NTSC saa7115: set audio: 0x01 ivtv: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ==================== thanks, --james ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
