Can you post your modprobe.conf please? Are you tuning through mythtv or with ptune? Thanks
On Tue, 25 Jan 2005 19:58:15 +0100, Nick Rosier <[EMAIL PROTECTED]> wrote: > ok, got it working with a couple of minor problems: > - quality of the PVR150 is not as good as of the PVR350; got some sort > of rastering effect (horizontal and vertical lines) > - TV-out on the 350 stopped working; had the same problem yesterday > when I was testing; removing the 150 and going back to the old config > solved it so the card is working fine. > > Anyone else seeing this? I'm already happy I got some results but of > course it would be great to get it working complety. > > N. > > On Tue, 25 Jan 2005 17:39:55 +0100, Nick Rosier <[EMAIL PROTECTED]> wrote: > > I've got a PVR150MCE Pal (PAL-B/G-I-D/K-SECAM, some stuff printed on > > the side: TAPE-SOC1D or something like that); bought them with some > > friends in bulk (cheaper...) so besides the card, I have nothing. > > Guessing it's tuner 51. My PVR350 uses tuner 38. > > Since I the 350 is detected 1st, I specified tuner=38,51 but that > > didn't seem to do the trick. MythTV just gives static on; I haven't > > configured the 2nd card in Myth yet though. > > Might have to play around some more with the options. I'll try > > enabling/disabling several of the options as described in the README. > > > > On Mon, 24 Jan 2005 23:53:11 +0100, Peter Martens > > <[EMAIL PROTECTED]> wrote: > > > > could you share your settings? I've been trying to get this work but > > > > also keep getting the type 4 tuner. > > > > lspci shows: > > > > 0000:02:07.0 Multimedia video controller: Internext Compression Inc > > > > iTVC15 MPEG-2 Encoder (rev 01) > > > > 0000:02:09.0 Multimedia video controller: Internext Compression Inc > > > > iTVC16 (CX23416) MPEG-2 Encoder (rev 01) > > > > > > > > So I did: > > > > options saa7127 i2c_enable=1,-1 > > > > options cx25840 i2c_enable=-1,1 > > > > as described in the README but I still get the wrong tuner. Any other > > > > things I need to take care of? > > > > > > > > N. > > > > > > > I figured that saa7127 i2c_enable=1,-1 (or -1,1) does the trick. In my > > > case the cx25840_enable line disables the cx25840 no matter what. > > > You have to specify tuner=51 (in my case). > > > That s all. > > > Still having trouble with tuning, only a few channels are acceptable. > > > But I think the tuner on my card is broken. Testing in windows gave me > > > rhe same result (although I had pour signal to my windows box > so I > > > am not fairly sure...) > > > > > > Greets > > > Peter > > > > > > ------------------------------------------------------- > > > This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting > > > Tool for open source databases. Create drag-&-drop reports. Save time > > > by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. > > > Download a FREE copy at http://www.intelliview.com/go/osdn_nl > > > _______________________________________________ > > > ivtv-devel mailing list > > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting > Tool for open source databases. Create drag-&-drop reports. Save time > by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. > Download a FREE copy at http://www.intelliview.com/go/osdn_nl > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
