On Sun, 30 Jan 2005 23:34:41 -0800 Chris Petersen <[EMAIL PROTECTED]> wrote:
> > For my application, capturing from a direcTV receiver, I want to use > > the s-video input. What I've found is the hack that has been > > discussed on the list will cause the tuner audio to appear when input > > 6 (tuner) is selected, but it also has the line input active. The > > same is true in reverse. If you select input 0 (S-Video) it has both > > the line input and the tuner audio. Same with the composite input. > > Selecting either input 1, 2, or 3 gives composite video with line in > > and tuner audio. > > Do you have color S-Video? I can't get mine to show color (composite > works fine in color, don't have anything to test the tuner with). > I do not have color on the S-video input. I was going to investigate this further since I was not sure of my source device. That is good to know. Composite looks fine. > I've also noticed that input 1 merely gives you the last chosen input > that isn't 1. so if I go from 0 to 1, it stays on 0, or from 2 to 1, it > stays on 2 (I've checked this by unplugging wires). Hadn't looked that closely. I suspect the registers just aren't getting the right values. Perhaps John's patch will help with that also. ----- Jim Reese, WD5IYT [EMAIL PROTECTED] ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
