On Mon, 31 Jan 2005 14:02:18 -0800, Jason Weinstein <[EMAIL PROTECTED]> wrote: > So I'm still stuck with the -19 reading Hauppauge eeprom problem. I > did a fresh install of Debian "Sarge" and compiled/installed the 2.6.8 > kernel making sure i2c and v4l were set up to installed as modules. > > If they existed in /lib/modules/2.6.8/kernel/drivers, I removed > msp3400.ko, saa7115.ko, saa7127.ko, and tveeprom.ko. I also removed > eeprom.ko to be sure it would never load. >
The modules in conflict are msp3400 and tveeprom. I don't believe you should be touching the other modules you removed. > I then compiled/installed ivtv-0.2.0-rc3e, did modprobe ivtv, and in > dmesg I still get: > > ==================== START INIT IVTV ==================== > ivtv: version 0.2.0 (rc3e) loading > ivtv: Linux version: 2.6.8 PENTIUM4 gcc-3.3 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 350 card > ivtv: Found an iTVC15 based chip > ivtv: XXX PCI device: 0x0651 vendor: 0x1039 > tveeprom: Ignoring new-style parameters in presence of obsolete ones > ivtv: i2c client addr: 0x50 not found! > ivtv: Error -19 reading Hauppauge eeprom. > ivtv: Possible causes: the tveeprom module was not loaded, or > ivtv: the eeprom kernel module was loaded before the tveeprom module. > > I have checked and a tveeprom-ivtv does not exist. I tried adding > CFLAGS += -DNEW_I2C to Makefile2.6. When I modprobe i2c-algo-bit I do > not get anything in dmesg. Modprobing tveeprom only gives me "Ignoring > new-style parameters in presence of obsolete ones." I also don't get > anything in dmesg doing Modprobe tuner. Well, this just means you are giving some arguments in the modprobe.conf that aren't needed. I don't believe you've sent the contents of modprobe.conf to the list. Can you do that (again if this is a repeat) ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
