On Thu, Mar 03, 2005 at 02:13:24PM +0100, Freaky wrote:
> I have a small, hopefully easy for those with knowledge on topic, ques. My
> mahcine has a older Via based mainboard. Somewhere I read these chipsets
> have problems when the PCI bus gets pretty full. This is greatly visible
> under windows, as I can't use my card properly on it without the system
> rebooting within 10 minutes (in several setups/programs / driver
> combinations / PCI slots. in some slots I can't use it at all under
> windows (instant reboot upon accessing the card)). This is when only 1 of
> the 2 tuners on my PVR-500 is active. Under linux I can run both tuners
> without problems / weird log entries. The image isn't crisp though and I
> always figured it is because my tuner isn't (fully) supported yet (btw, I
> saw some posts on the tuner Philips FQ1216AME MK4, I'm willing to help
> debug / provide access).

FWIW, we're running an MSI KT4AV board with a KT400A chipset, with 2
250's and a Radeon 9200SE on the AGP slot, and so far, no problems I
can allocate to that issue.  We're going to add another tuner or two in
the next month or two, and I'm sure I'll report it if I have any
problems.

Cheers,
-- jra
-- 
Jay R. Ashworth                                                [EMAIL PROTECTED]
Designer                          Baylink                             RFC 2100
Ashworth & Associates        The Things I Think                        '87 e24
St Petersburg FL USA      http://baylink.pitas.com             +1 727 647 1274

      If you can read this... thank a system adminstrator.  Or two.  --me


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Reply via email to