On Wed, 2005-03-09 at 08:01 +0000, Allan Stirling wrote: > Stephen wrote: > >I've looked at the cx25840 audiofmt parameter, but I'm not convinced the > >parameters are the same as the msp3400 audiofmt parameter. > > > >The cx25840 driver unhelpfully says only: > > > >MODULE_PARM_DESC(audiofmt, "Audio Format: default=autodetect, > >1=NTSC,...0xE"); > > > If I'm right, this is the audio format list directly from the driver code. > > case 0x00: p="Not defined"; break; > case 0x01: p="EIAJ"; break; > case 0x02: p="A2-M"; break; > case 0x03: p="A2-BG"; break; > case 0x04: p="A2-DK1"; break; > case 0x05: p="A2-DK2"; break; > case 0x06: p="A2-DK3"; break; > case 0x07: p="A1 (6.0 MHz FM Mono)"; break; > case 0x08: p="AM-L"; break; > case 0x09: p="NICAM-BG"; break; ... > case 0xFE: p="Forced audio standard"; break; > case 0xFF: p="No detected audio standard"; break; > > However, one of the good points of this chipset is that you shouldn't > need to force anything. It _should_ autodetect.
Thanks for the reply, I have tried loading both ivtv and cx25840 with audiofmt=9 or but again no difference. Am I using the wrong driver, 0.3.2h? There seem to be differing reports on the list about which versions are more stable for audio detection? Stephen. -- Nipper <[EMAIL PROTECTED]> ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
