Exact same card as you Scott also running Gentoo... haven't compared
your IVTV load output with mine, later tonight I'll compare. Not to go
against the progress that has been made, but with that card I'm
running 0.3.2d with the line 1120 driver/cx25840-driver.c changed to
CX25840_SET_AUD_STANDARD(0x0001)
showdog root # cat /etc/modules.d/ivtv
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-61 lirc_i2c
options ivtv tuner=39 ivtv_std=1 tda9887=0
add above ivtv lirc_dev lirc_i2c
With this I can modprobe ivtv and everything just works.
I can't say for sure that the composite in is working - as I'm only
using the tuner... but I can try it out when I get a chance.
*this is NTSC btw.
On Fri, 11 Mar 2005 10:16:41 -0600, Scott Carr <[EMAIL PROTECTED]> wrote:
> Jarod Wilson wrote:
> On Thursday 10 March 2005 16:09, Scott Carr wrote:
>
> Capture log output between the ivtv start and stop markers in
> /var/log/message, then ship it off to the list. We can help you much better
> if you show some logs. I sent the dmesg output with the first message I
> sent to the list. Does the /var/log/message file have different messages?
> Ah, somehow I missed that, sorry. Oh, you called it "less". I didn't realize
> what that was. Looking at it now... No, that's not much help. Please get the
> output from this: tac /var/log/messages | sed -n '/=\ \ END INIT IVTV\ \
> =/,/= START INIT IVTV =/p; /= START INIT IVTV =/q' | tac Ok please find
> attached the dmesg output after loading the drivers and running a cat
> /dev/video0 > test.mpg.
>
> Hope this helps you help me. ;-) Thanks
>
> -- Scott Carr OpenOffice.org Documentation Co-Lead
> http://documentation.openoffice.org
> ivtv: Removing Card #0.
> ivtv: Removed WinTV PVR 150, card #0
> Linux video capture interface: v1.00
> cx25840: Ignoring new-style parameters in presence of obsolete ones
> tuner: Unknown parameter `tuner'
> tuner: Ignoring new-style parameters in presence of obsolete ones
> wm8775: Unknown parameter `mixer_input'
> wm8775: Ignoring new-style parameters in presence of obsolete ones
> wm8775: Init
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.3.2 (f) loading
> ivtv: Linux version: 2.6.10-gentoo-r6 K6 gcc-3.3
> ivtv: In case of problems please include the debug info
> ivtv: between the START INIT IVTV and END INIT IVTV lines when
> ivtv: mailing the ivtv-devel mailinglist.
> ivtv: Autodetected WinTV PVR 150 card
> ivtv: Found an iTVC16 based chip
> ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
> ivtv: XXX PCI device: 0x0530 vendor: 0x1039
> tveeprom: Hauppauge: model = 26052, rev = C182, serial# = 2903280
> tveeprom: tuner = LG TAPC H791F (idx = 82, type = 39)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
> tveeprom: audio_processor = MSP3410D (type = 5)
> ivtv: i2c attach [client=tveeprom[0],ok]
> cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
> cx25840: client id: cx25840_i2c_id 0, skipped
> tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> ivtv: i2c attach [client=(tuner unset),ok]
> wm8775: starting probe for adapter ivtv i2c driver #0 (0x10005)
> wm8775: detecting client on address 0x36
> wm8775: Offset reset.reg[0]=2e00
> wm8775: Offset reset.reg[1]=0e00
> wm8775: Offset reset.reg[2]=1600
> wm8775: Offset reset.reg[3]=1800
> wm8775: Offset reset.reg[4]=1a00
> wm8775: Offset reset.reg[5]=1c00
> wm8775: Offset reset.reg[6]=1e00
> wm8775: Offset reset.reg[7]=2000
> wm8775: Offset reset.reg[8]=2200
> wm8775: Offset reset.reg[9]=2400
> wm8775: Offset reset.reg[10]=2600
> wm8775: Offset reset.reg[11]=2800
> wm8775: Offset reset.reg[12]=2a00
> wm8775: Updating reg[R23]=2e01 added Reset with default 1
> wm8775: Updating reg[R7]=0e00 added TOD with default 0
> wm8775: Updating reg[R11]=1600 added ADCHPD with default 0
> wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0
> wm8775: Updating reg[R11]=1620 added ADCWL with default 2
> wm8775: Updating reg[R11]=1620 added ADCBCP with default 0
> wm8775: Updating reg[R11]=1620 added ADCLRP with default 0
> wm8775: Updating reg[R11]=1622 added ADCFMT with default 2
> wm8775: Updating reg[R12]=1800 added ADCMS with default 0
> wm8775: Updating reg[R12]=1800 added ADCOSR with default 0
> wm8775: Updating reg[R12]=1802 added ADCRATE with default 2
> wm8775: Updating reg[R13]=1a00 added AINPD with default 0
> wm8775: Updating reg[R13]=1a00 added ADCPD with default 0
> wm8775: Updating reg[R13]=1a00 added PWDN with default 0
> wm8775: Updating reg[R14]=1c00 added ZCLA with default 0
> wm8775: Updating reg[R14]=1ccf added LAG with default 207
> wm8775: Updating reg[R15]=1e00 added ZCRA with default 0
> wm8775: Updating reg[R15]=1ecf added RAG with default 207
> wm8775: Updating reg[R16]=2000 added LCSEL with default 0
> wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7
> wm8775: Updating reg[R16]=207b added LCT with default 11
> wm8775: Updating reg[R17]=2200 added LCEN with default 0
> wm8775: Updating reg[R17]=2200 added ALCZC with default 0
> wm8775: Updating reg[R17]=2200 added HLD with default 0
> wm8775: Updating reg[R18]=2430 added DCY with default 3
> wm8775: Updating reg[R18]=2432 added ATK with default 2
> wm8775: Updating reg[R19]=2600 added NGTH with default 0
> wm8775: Updating reg[R19]=2600 added NGAT with default 0
> wm8775: Updating reg[R20]=2820 added TRANWIN with default 2
> wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6
> wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0
> wm8775: Updating reg[R21]=2a00 added MUTELA with default 0
> wm8775: Updating reg[R21]=2a00 added MUTERA with default 0
> wm8775: Updating reg[R21]=2a01 added AMX with default 1
> wm8775: Final reset.reg[0]=2e01
> wm8775: Final reset.reg[1]=0e00
> wm8775: Final reset.reg[2]=1622
> wm8775: Final reset.reg[3]=1802
> wm8775: Final reset.reg[4]=1a00
> wm8775: Final reset.reg[5]=1ccf
> wm8775: Final reset.reg[6]=1ecf
> wm8775: Final reset.reg[7]=207b
> wm8775: Final reset.reg[8]=2200
> wm8775: Final reset.reg[9]=2432
> wm8775: Final reset.reg[10]=2600
> wm8775: Final reset.reg[11]=2826
> wm8775: Final reset.reg[12]=2a01
> wm8775: Offset reset.reg[0]=2e00
> wm8775: Offset reset.reg[1]=0e00
> wm8775: Offset reset.reg[2]=1600
> wm8775: Offset reset.reg[3]=1800
> wm8775: Offset reset.reg[4]=1a00
> wm8775: Offset reset.reg[5]=1c00
> wm8775: Offset reset.reg[6]=1e00
> wm8775: Offset reset.reg[7]=2000
> wm8775: Offset reset.reg[8]=2200
> wm8775: Offset reset.reg[9]=2400
> wm8775: Offset reset.reg[10]=2600
> wm8775: Offset reset.reg[11]=2800
> wm8775: Offset reset.reg[12]=2a00
> wm8775: Updating reg[R23]=2e01 added Reset with default 1
> wm8775: Updating reg[R7]=0e00 added TOD with default 0
> wm8775: Updating reg[R11]=1600 added ADCHPD with default 0
> wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0
> wm8775: Updating reg[R11]=1620 added ADCWL with default 2
> wm8775: Updating reg[R11]=1620 added ADCBCP with default 0
> wm8775: Updating reg[R11]=1620 added ADCLRP with default 0
> wm8775: Updating reg[R11]=1622 added ADCFMT with default 2
> wm8775: Updating reg[R12]=1800 added ADCMS with default 0
> wm8775: Updating reg[R12]=1800 added ADCOSR with default 0
> wm8775: Updating reg[R12]=1802 added ADCRATE with default 2
> wm8775: Updating reg[R13]=1a00 added AINPD with default 0
> wm8775: Updating reg[R13]=1a00 added ADCPD with default 0
> wm8775: Updating reg[R13]=1a00 added PWDN with default 0
> wm8775: Updating reg[R14]=1c00 added ZCLA with default 0
> wm8775: Updating reg[R14]=1ccf added LAG with default 207
> wm8775: Updating reg[R15]=1e00 added ZCRA with default 0
> wm8775: Updating reg[R15]=1ecf added RAG with default 207
> wm8775: Updating reg[R16]=2000 added LCSEL with default 0
> wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7
> wm8775: Updating reg[R16]=207b added LCT with default 11
> wm8775: Updating reg[R17]=2200 added LCEN with default 0
> wm8775: Updating reg[R17]=2200 added ALCZC with default 0
> wm8775: Updating reg[R17]=2200 added HLD with default 0
> wm8775: Updating reg[R18]=2430 added DCY with default 3
> wm8775: Updating reg[R18]=2432 added ATK with default 2
> wm8775: Updating reg[R19]=2600 added NGTH with default 0
> wm8775: Updating reg[R19]=2600 added NGAT with default 0
> wm8775: Updating reg[R20]=2820 added TRANWIN with default 2
> wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6
> wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0
> wm8775: Updating reg[R21]=2a00 added MUTELA with default 0
> wm8775: Updating reg[R21]=2a00 added MUTERA with default 0
> wm8775: Updating reg[R21]=2a01 added AMX with default 1
> wm8775: Final reset.reg[0]=2e01
> wm8775: Final reset.reg[1]=0e00
> wm8775: Final reset.reg[2]=1622
> wm8775: Final reset.reg[3]=1802
> wm8775: Final reset.reg[4]=1a00
> wm8775: Final reset.reg[5]=1ccf
> wm8775: Final reset.reg[6]=1ecf
> wm8775: Final reset.reg[7]=207b
> wm8775: Final reset.reg[8]=2200
> wm8775: Final reset.reg[9]=2432
> wm8775: Final reset.reg[10]=2600
> wm8775: Final reset.reg[11]=2826
> wm8775: Final reset.reg[12]=2a01
> wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02
> wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00
> wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03
> wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00
> wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00
> wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01
> wm8775: Updating register 0 (R23), config: 2e01 active: 2e00.
> wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00.
> wm8775: Updating register 2 (R11), config: 1622 active: 1621.
> wm8775: Updating register 3 (R12), config: 1802 active: 1902.
> wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00.
> wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf.
> wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf.
> wm8775: Skipping register 7 (R16), config: 207b active: 207b.
> wm8775: Skipping register 8 (R17), config: 2200 active: 2200.
> wm8775: Updating register 9 (R18), config: 2432 active: 2482.
> wm8775: Updating register 10 (R19), config: 2600 active: 2601.
> wm8775: Skipping register 11 (R20), config: 2826 active: 2826.
> wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f.
> ivtv: i2c attach [client=wm8775[0],ok]
> ivtv: Encoder revision: 0x02040011
> ivtv: Configuring WinTV PVR 150 card with 4 streams
> ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
> ivtv: Registered v4l2 device, streamtype 0 minor 0
> ivtv: Create DMA stream 1
> ivtv: Registered v4l2 device, streamtype 1 minor 32
> ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
> ivtv: Registered v4l2 device, streamtype 2 minor 224
> ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
> ivtv: Registered v4l2 device, streamtype 3 minor 24
> ivtv: Setting Tuner 39
> tuner: type set to 39 (LG NTSC (newer TAPC series)) by ivtv i2c driver #0
> ivtv: i2c client addr: 0x44 not found!
> ivtv: Switching standard to NTSC.
> ivtv: i2c client addr: 0x44 not found!
> ivtv: Initialized WinTV PVR 150, card #0
> ivtv: ==================== END INIT IVTV ====================
> ivtv: ivtv_enc_thread: pid = 9210, itv = 0xc63f29c0
>
> # This is after doing 'cat /dev/video0 > test.mpg' #
>
> ivtv: i2c client addr: 0x44 not found!
> ivtv: i2c client addr: 0x44 not found!
> ivtv: i2c client addr: 0x44 not found!
> ivtv: i2c client addr: 0x44 not found!
> ivtv: i2c client addr: 0x44 not found!
> ivtv: i2c client addr: 0x44 not found!
>
>
>
--
"The web must remain a universal medium open to all and not biasing
the information it conveys," - TBL
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
