Hi there, Here's the modprobe.conf I'm using atm:
#ivtv (PVR-150MCE) options tuner pal=G options tda9887 qss=0 alias char-major-81 videodev alias char-major-81-0 ivtv options cx25840 no_black_magic=1 I also seem to have to load the module manually using the tda9887=0 option... I'm not sure why this is... Nor am I entrely sure as to why the decoder message is coming up. It just seems to happen whenever I use mythtv. If anybody's got any ideas about the manual loading or the decoder message, feel free to make some noise. Cheers, /drdaz On Apr 9, 2005 2:42 AM, Rick Stewart <[EMAIL PROTECTED]> wrote: > Also - could you post your modprobe.conf settings? > I used to have those 'tuner not set messages' until I put 'options ivtv > ivtv_debug=1 tuner=58,58,58,58 tda9887=0,0' into my modprobe.conf although > I'm confused as to why I need 58 repeated or why I need it at all seeing as > the driver seems to detect a type 58 tuner, same as you seem to get. > > I have the same card and have similar results (picture but no sound) but I'm > interested in the lines at the end of your dmesg output: > > > > cx25840: Decoder set size 720x576 (from 720x576) -> scale 0x65536, > > > filter 0 > > I'm having problems with the video size - seems to always go back to 480x480 > and the picture is offset to the right, i.e. right-hand end of the picture > is missing compared to regular TV. > > Cheers, > > Rick > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of > > John Freeman > > Sent: Thursday, 7 April 2005 12:28 p.m. > > To: ivtv-devel@lists.sourceforge.net > > Subject: Re: [ivtv-devel] [PVR-150MCE PAL] "Tuner type not > > set" even though it is?!?! > > > > Have you tried running mythtvsetup and redoing your card and > > channel setting? This is a common solution for this problem. > > > > On Apr 6, 2005 6:38 PM, Darren Black <[EMAIL PROTECTED]> wrote: > > > Hi there, > > > > > > I'm trying to get my new PVR-150MCE to do its thing, and > > I've gotten > > > stuck. The TV card displays (a quite lovely) picture in MythTV, but > > > unfortunately wont allow me to change channels. Having > > examined dmesg, > > > I am finding it difficult to spot any initialisation errors, and in > > > fact I can see that the tuner is being correctly set (in > > contrast to > > > how it was earlier today). What I also notice is that while > > no error > > > occurs in MythTV (with default logging), some errors can be > > seen in my > > > dmesg output under the ivtv init. Here's the log: > > > > > > Linux video capture interface: v1.00 > > > ivtv: ==================== START INIT IVTV ==================== > > > ivtv: version 0.3.2 (q) loading > > > ivtv: Linux version: 2.6.10-1.770_FC3 686 REGPARM 4KSTACKS gcc-3.4 > > > ivtv: In case of problems please include the debug info > > > ivtv: between the START INIT IVTV and END INIT IVTV lines when > > > ivtv: mailing the ivtv-devel mailinglist. > > > ivtv: Autodetected WinTV PVR 150 card > > > ivtv: Found an iTVC16 based chip > > > ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 12 > > > ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 12 (level, low) -> IRQ 12 > > > ivtv: Unreasonably low latency timer, setting to 64 (was 32) > > > ivtv: XXX PCI device: 0x01e0 vendor: 0x10de > > > tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 7862778 > > > tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58) > > > tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) > > > tveeprom: audio_processor = MSP3410D (type = 5) > > > ivtv: i2c attach [client=tveeprom[0],ok] > > > ivtv: Tuner Type 58, Tuner formats 0x00400e17, Radio: yes, Model > > > 0x008d2590, Revision 0x00000001 > > > ivtv: PAL tuner detected > > > ivtv: SECAM tuner detected > > > ivtv: Radio detected > > > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > > > ivtv: i2c attach [client=(tuner unset),ok] > > > cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13353 loaded. > > > cx25840: FW image md5 digest: aa4d1e3dd17667957d8fe5b8d2d19395 > > > cx25840: FW image sha1 digest: > > > 60eafed58e943664aae4754b32271e09a95496b4 > > > ivtv: i2c attach [client=cx25840[0],ok] > > > ivtv: i2c attach [client=wm8775[0],ok] > > > ivtv: Encoder revision: 0x02040024 > > > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > > > ivtv: Configuring WinTV PVR 150 card with 5 streams > > > ivtv: Registered v4l2 device, streamtype 0 minor 0 > > > ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes > > > total > > > ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 > > > kbytes totalivtv: Registered v4l2 device, streamtype 1 minor 32 > > > ivtv: Create DMA stream 1 > > > ivtv: Allocate DMA stream 1 > > > ivtv: Registered v4l2 device, streamtype 2 minor 224 > > > ivtv: Create stream 2 using 40 52224 byte buffers 0 kbytes total > > > ivtv: Allocate stream 2 using 40 52224 byte buffers 2097152 kbytes > > > total > > > ivtv: Registered v4l2 device, streamtype 3 minor 24 > > > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 > > kbytes total > > > ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 > > > kbytes total > > > ivtv: Registered v4l2 device, streamtype 4 minor 64 > > > ivtv: Create stream 4 > > > ivtv: Allocate stream 4 > > > ivtv: Setting Tuner 58 > > > ivtv: Switching standard to PAL. > > > ivtv: ivtv_enc_thread: pid = 5309, itv = 0xdec13220 > > > ivtv: Initialized WinTV PVR 150, card #0 > > > ivtv: ==================== END INIT IVTV ==================== > > > tuner: tuner type not set > > > cx25840: Decoder set size 720x576 (from 720x576) -> scale 0x65536, > > > filter 0 > > > tuner: tuner type not set > > > tuner: tuner type not set > > > > > > The only thing I can see that even resembles an error here is: > > > "ivtv: Unreasonably low latency timer, setting to 64 (was 32)" > > > but I'm really not sure what it means. > > > > > > For what it's worth, I'm kinda new to linux (started about > > a month ago > > > to make a myth box... very impressed) and coming from Windows, feel > > > like quite the n00b. I'm learning tho, and enjoying doing it :-) > > > > > > Here's hoping somebody out there can help me with this bizarre > > > problem. I've been following Jarod's guide to installing > > myth, so I've > > > installed more or less everything from rpms. > > > > > > Thanks in advance, > > > /drdaz > > > > > > ------------------------------------------------------- > > > SF email is sponsored by - The IT Product Guide Read honest > > & candid > > > reviews on hundreds of IT Products from real users. > > > Discover which products truly live up to the hype. Start > > reading now. > > > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > > > _______________________________________________ > > > ivtv-devel mailing list > > > ivtv-devel@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > > > > > > > > ------------------------------------------------------- > > SF email is sponsored by - The IT Product Guide Read honest & > > candid reviews on hundreds of IT Products from real users. > > Discover which products truly live up to the hype. Start reading now. > > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > > _______________________________________________ > > ivtv-devel mailing list > > ivtv-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real users. > Discover which products truly live up to the hype. Start reading now. > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > _______________________________________________ > ivtv-devel mailing list > ivtv-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
